Intel® FPGA SDK for OpenCL™ Standard Edition: Cyclone® V SoC Getting Started Guide

ID 683030
Date 4/20/2022
Document Table of Contents

3.7.2. Configuring the SW3 Switches

Configure the SW3 dual in-line package (DIP) switches on the Cyclone® V SoC Development Kit for use with the Intel® FPGA SDK for OpenCL™. The switch bank is located next to the micro SD card slot.
Set the SW3 DIP switches to the following positions:
Switch Configuration
1 ON
3 ON
5 ON
6 ON
The figure below illustrates the physical configuration of the SW switches on the Cyclone V SoC Development Kit: