GTS DisplayPort FPGA IP Design Example User Guide

Download PDF
ID 823560
Date 12/09/2025
Public
Document Table of Contents
Document Table of Contents x
1. DisplayPort IP Design Example Quick Start Guide 2. DisplayPort IP Design Examples 3. DisplayPort SST Parallel Loopback without PCR Design Example 4. DisplayPort SST Parallel Loopback with AXI4-S Video Interface Design Example 5. DisplayPort SST TX-Only Design Example 6. DisplayPort SST RX-Only Design Example 7. Document Revision History for the GTS DisplayPort FPGA IP Design Example User Guide
1. DisplayPort IP Design Example Quick Start Guide x
1.1. Directory Structure 1.2. Hardware and Software Requirements 1.3. Generating the Design 1.4. Simulating the Design 1.5. Compiling and Testing the Design 1.6. Regenerating the Nios V .elf File 1.7. DisplayPort IP Design Example Parameters
1.5. Compiling and Testing the Design x
1.5.1. Compiling and Testing the Design Using Agilex™ 3 FPGA and SoC C-Series Development Kit 1.5.2. Compiling and Testing the Design Using Agilex™ 5 E-Series 065B Premium Development Kit 1.5.3. Compiling and Testing the Design Using Agilex™ 5 E-Series 065B Modular Development Kit Connector with No FMC Mode 1.5.4. Compiling and Testing the Design Using Agilex™ 5 E-Series 065B Modular Development Kit Connector with Bitec Rev 8 Daughter Card
2. DisplayPort IP Design Examples x
2.1. Design Components 2.2. DisplayPort IP Design Example Clock Domains 2.3. Interface Signals and Parameters 2.4. Simulation Testbench
3. DisplayPort SST Parallel Loopback without PCR Design Example x
3.1. Features 3.2. Functional Description
4. DisplayPort SST Parallel Loopback with AXI4-S Video Interface Design Example x
4.1. Features 4.2. Functional Description
5. DisplayPort SST TX-Only Design Example x
5.1. DisplayPort SST TX-Only Features 5.2. DisplayPort SST TX-Only Functional Description
6. DisplayPort SST RX-Only Design Example x
6.1. DisplayPort SST RX-Only Features 6.2. DisplayPort SST RX-Only Functional Description
1. DisplayPort IP Design Example Quick Start Guide
2. DisplayPort IP Design Examples
3. DisplayPort SST Parallel Loopback without PCR Design Example
4. DisplayPort SST Parallel Loopback with AXI4-S Video Interface Design Example
5. DisplayPort SST TX-Only Design Example
6. DisplayPort SST RX-Only Design Example
7. Document Revision History for the GTS DisplayPort FPGA IP Design Example User Guide

1.5.4. Compiling and Testing the Design Using Agilex™ 5 E-Series 065B Modular Development Kit Connector with Bitec Rev 8 Daughter Card

The Modular Development Kit supports the Bitec DisplayPort FMC Card Revision 8. These connectors can be used for DP1.4 designs with data rates up to 8.1 GHz (HBR3). If you select the FMC as the target connector, follow these steps to compile and run a demonstration test on the hardware design example:
Modular Development Kit Connector with Bitec Rev 8 Daughter Card
Note: Altera® recommends you to follow these steps when the Parretto FMC is used.
  1. Ensure hardware design example generation is complete.
  2. Launch the Quartus® Prime Pro Edition software and open <project>/quartus/agi_dp_demo.qpf.
  3. On the Processing menu, click Start Compilation.
  4. Confirm successful compilation by verifying that the IP generates the bitstream file (.sof) and meets the timing requirements.
  5. Connect the DisplayPort TX connector on the Bitec daughter card (revision 8) to a DisplayPort sink device, such as a video analyzer or a PC monitor. Connect the DisplayPort RX connector to the video source.
Related Information
Level Two Title