| 2025.10.24 |
25.3 |
10.0.0 |
- Updated Design Components table for 10/100/1000 Ethernet MAC Design Example with 1000BASE-X/SGMII 2XTBI PCS with GTS Transceiver to add Use HVIO PLL, Enable Clkrx Recovery Logic, and Enable PHY Debug Master Endpoint options.
- Updated Test Procedure topic for Hardware Testing for 10/100/1000 Ethernet MAC Design Example with 1000BASE-X/SGMII 2XTBI PCS with GTS Transceiver to include steps for performing external loopback testing and serial internal loopback testing.
- Updated the Testbench File Description table for 10/100/1000 Ethernet MAC Design Example with 1000BASE-X/SGMII 2XTBI PCS with GTS Transceiver to include testbench scripts directory/files for single-channel simulation.
- Updated Generating the Design Example topic for 10/100/1000 Ethernet MAC Design Example with 1000BASE-X/SGMII 2XTBI PCS with GTS Transceiver to include steps to generate single channel and multi channel designs.
- Updated Steps to Simulate the Testbench table for 10/100/1000 Ethernet MAC Design Example with 1000BASE-X/SGMII 2XTBI PCS with GTS Transceiver to include the command lines for single channel and multichannel designs.
- Updated Features topic for 10/100/1000 Multiport Ethernet MAC Design Example with 1000BASE-X/SGMII PCS and Embedded PMA (LVDS) design example to add support for single port.
- Added lvds_rx_dpa_locked and rx_recv_clk_in_locked_n signals in the 10/100/1000Mb Ethernet MAC with 1000BASE-X/ SGMI PCS figure.
- Updated Functional Description topic for 10/100/1000 Multiport Ethernet MAC Design Example with 1000BASE-X/SGMII PCS and Embedded PMA (LVDS) to add a note about multiport and single port support.
|
| 2025.08.04 |
25.1.1 |
9.0.0 |
- Updated Block Diagram—10/100/1000Mb Ethernet MAC with 1000BASE-X/SGMII 2XTBI PCS with GTS Transceiver diagram.
- Added 10/100/1000 Ethernet MAC without Internal FIFO Buffers with 1000BASE-X/SGMII 2XTBI PCS and Embedded PMA Signals (GTS Direct PHY) with IEEE 1588v2 design example.
- Added 10/100/1000 Ethernet MAC without Internal FIFO Buffers with 1000BASE-X/SGMII TBI PCS and Embedded PMA Signals (LVDS I/O) with IEEE 1588v2 design example.
- Added Reset Release IP in the Design Components table for 10/100/1000 ethernet MAC design example with 1000BASE-X/SGMII 2XTBI PCS with GTS transceiver.
|
| 2025.04.07 |
25.1 |
8.0.0 |
- Updated the following topics in the 10/100/1000 Ethernet MAC Design Example with 1000BASE-X/SGMII 2XTBI PCS with GTS Transceiver:
- Added a note about Agilex™ 3 device support in the Quick Start Guide topic.
- Updated Procedure to Generate Design Example in the Generating the Design Example topic:
- Updated the preset name to 10/100/1000Mb Ethernet MAC with 1000BASE-X/SGMII 2XTBI PCS and PMA(GTS) (Agilex 5, Agilex 3).
- Added a step to select the Target Development Kit for Agilex™ 3 device.
- Updated the description for None option for Select Board parameter in the Parameters in the Example Design Tab table.
- Added a note about Agilex™ 3 device hardware support in the Compiling and Configuring the Design Example in Hardware.
- Added a note about Agilex™ 3 device hardware support in the Hardware and Software Requirements in the 10/100/1000 Ethernet MAC Design Example with 1000BASE-X/SGMII 2XTBI PCS with GTS Transceiver design example.
- Added MDIO Module for MAC Options component in the Design Components table.
- Updated the following topics in the 10/100/1000 Multiport Ethernet MAC Design Example with 1000BASE-X/SGMII PCS and Embedded PMA (LVDS):
- Updated Procedure to Generate Design Example in the Generating the Design Example topic:
- Updated the preset name to Multi channel Triple Speed Ethernet MAC PCS Example Design (LVDS) (Agilex 5, Agilex 3).
- Updated Design Components table to include Interface in the Core Configuration component.
|
| 2024.10.07 |
24.3 |
6.0.0 |
Added a new design example variant: 10/100/1000 Multiport Ethernet MAC Design Example with 1000BASE-X/SGMII PCS and Embedded PMA (LVDS). |
| 2024.07.08 |
24.2 |
5.0.0 |
- Updated the description in the Quick Start Guide topic.
- Updated Development Stages for the Design Example figure.
- Added a note about the Agilex™ 5 D-Series FPGAs and SoCs support in the Quick Start Guide topic.
- Updated Directory Structure for the Design Example figure.
- Updated Testbench File Description table.
- Updated Generating the Design Example topic to include the steps to select the Agilex™ 5 FPGA E-Series 065B Premium Development Kit (ES1) target development kit.
- Updated Parameters in the Example Design Tab table.
- Removed VCS* from Steps to Simulate the Testbench table.
- Added Compiling and Configuring the Design Example in Hardware topic.
- Updated the following for 10/100/1000 ethernet MAC design example with 1000BASE-X/SGMII 2XTBI PCS with GTS transceiver:
- Features topic.
- Hardware and Software Requirements topic.
- Block Diagram—10/100/1000Mb Ethernet MAC with 1000BASE-X/SGMII 2XTBI PCS with GTS Transceiver.
- Updated PCS/Transceiver Options in the Design Components table.
- Updated Block Diagram of the 10/100/1000Mb Ethernet MAC Design Example with 1000BASE-X/SGMII 2XTBI PCS with GTS Transceiver Simulation Testbench figure.
- Added Hardware Testing, Test Procedure topic.
- Updated description for pll_refclk0 and reg_clk signals in the Interface Signals for 10/100/1000 Ethernet MAC Design Example with 1000BASE-X/SGMII 2XTBI PCS with GTS Transceiver table.
|
| 2024.04.01 |
24.1 |
4.0.0 |
Initial release. |