2.1. Port Numbering Scheme
2.2. Clock Signals
2.3. Reset Signals
2.4. Fractured MAC Segmented Interface for FGT Transceivers
2.5. Fractured MAC Segmented Interface for FHT Transceivers
2.6. Fractured MAC Avalon ST Client Interface for FGT Transceivers
2.7. Fractured MAC Avalon ST Client Interface for FHT Transceivers
2.8. Fractured MII PCS-Only Interface for FGT Transceivers
2.9. Fractured MII PCS-Only Interface for FHT Transceivers
2.10. Fractured PCS66 Interface for OTN/FlexE for FGT Transceivers
2.11. Fractured PCS66 Interface for OTN/FlexE for FHT Transceivers
2.12. MAC Flow Control Interface
2.13. Status Interface
2.14. Avalon® Memory-Mapped Reconfiguration Interfaces
2.15. Auto-Negotiation and Link Training Interface
2.16. Precision Time Protocol Interface
2.16. Precision Time Protocol Interface
The Precision Time Protocol (PTP) interface is available when you enable Enable IEEE 1588 PTP option in the PTP tab. When selected, the IP generates PTP based 1-step or 2-step TX and RX timestamps. The IP requires the IEEE 1588 96-bit time-of-day (TOD) input.
The table below depicts the interface details for different number of ports. Each port within a reconfiguration group supports a separate TOD clock.
Maximum Number of Ports | Applicable Reconfiguration Groups | Signal Name |
---|---|---|
1 | FGT: 25GE-1 Reconfigurable 50GE-1 Reconfigurable FHT: 50GE-1 Reconfigurable 100GE-1 Reconfigurable |
i_clk_ptp_sample Port 0: i_p0_clk_tx_tod i_p0_clk_rx_tod |
2 | FGT: 100GE-2 Reconfigurable FHT: 100GE-2 Reconfigurable 200GE-2 Reconfigurable |
i_clk_ptp_sample Port 0: i_p0_clk_tx_tod i_p0_clk_rx_tod Port 1: i_p1_clk_tx_tod i_p1_clk_rx_tod |
4 | FGT: 100GE-4 Reconfigurable 400GE-8 Reconfigurable 200GE-4 Reconfigurable FHT: 100GE-4 Reconfigurable 400GE-4 Reconfigurable 200GE-4 Reconfigurable |
i_clk_ptp_sample Port 0: i_p0_clk_tx_tod i_p0_clk_rx_tod Port 1: i_p1_clk_tx_tod i_p1_clk_rx_tod Port 2: i_p2_clk_tx_tod i_p2_clk_rx_tod Port 3: i_p3_clk_tx_tod i_p3_clk_rx_tod |