AN 952: Intel® Arria® 10 HDMI 2.1 System Design Guidelines

Download PDF
ID 709310
Date 6/29/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Terms and Acronyms 2. Introduction 3. Scope of System Design Guidelines 4. System Design Guide Requirements 5. HDMI 2.1 Compliance Test Specification 6. Future System Level Optimization 7. Document Revision History for AN 952: Intel Arria 10 HDMI 2.1 System Design Guidelines
4. System Design Guide Requirements x
4.1. Enabling PCB panel design 4.2. PCB Best Practice 4.3. System Link Budgeting Recommendation
4.3. System Link Budgeting Recommendation x
4.3.1. FPGA TX Settings 4.3.2. FPGA RX Settings
5. HDMI 2.1 Compliance Test Specification x
5.1. Protocol IP Compliance Test Specification 5.2. Electrical Compliance Test Specification 5.3. Gaps and Resolution
6. Future System Level Optimization x
6.1. Availability of Redrivers/Retimers 6.2. Agilex Platform
1. Terms and Acronyms
2. Introduction
3. Scope of System Design Guidelines
4. System Design Guide Requirements
5. HDMI 2.1 Compliance Test Specification
6. Future System Level Optimization
7. Document Revision History for AN 952: Intel Arria 10 HDMI 2.1 System Design Guidelines

6.1. Availability of Redrivers/Retimers

The market demand dictates the availability of redrivers and retimers to support electrical reach and compliancy. You can freely adopt any available redriver depending on electrical characteristic of Source and Sink.

Intel recommends that you apply TX FFE and use compliant cables in the setup. It can be an advantage if you use better RX equalization design to recover signal on a PCB panel before feeding it into FPGA.

Level Two Title