Multi Channel DMA Intel® FPGA IP for PCI Express* User Guide

ID 683821
Date 7/30/2024
Public
Document Table of Contents

5.2. Example Designs

Table 71.  Example Designs

Parameter

Value

Description

Currently Selected Example Design

PIO using MQDMA Bypass mode

AVMM DMA

Device-side Packet Loopback

Packet Generate/Check

Select an example design available from the pulldown list. User Mode and Avalon-ST/Avalon-MM Interface type setting determines available example designs

Simulation On/Off When On, the generated output includes a simulation model.
Select simulation Root Complex BFM

Intel FPGA BFM

Third-party BFM

Choose the appropriate BFM for simulation.

Intel FPGA BFM: Default. This bus functional model (BFM) supports x16 configurations by downtraining to x8.

Third-party BFM: Select this If you want to simulate all 16 lanes using a third-party BFM.

Synthesis On/Off When On, the generated output includes a synthesis model.
Generated HDL format

Verilog/VHDL

Only Verilog HDL is available in the current release.

Target Development Kit

None

Stratix® 10 GX H-Tile Production FPGA Development Kit

Stratix® 10 MX H-Tile Production FPGA Development Kit

Select the appropriate development board.

If you select one of the development boards, system generation overwrites the device you selected with the device on that development board.
Note: If you select None, system generation does not make any pin assignments. You must make the assignments in the .qsf file.
Note: For more information about example designs, refer to the Multi Channel DMA Intel FPGA IP for PCI Express Design Example User Guide.