Low Latency 40-Gbps Ethernet Intel® FPGA IP User Guide: Stratix® 10
ID
683600
Date
5/31/2024
Public
1. About the Low Latency 40G Ethernet Core
2. Stratix® 10 Low Latency 40G Ethernet IP Core Parameters
3. Getting Started
4. Functional Description
5. Reset
6. Interfaces and Signal Descriptions
7. Control, Status, and Statistics Register Descriptions
8. Debugging the Link
9. Ethernet Toolkit Overview
10. Stratix® 10 Low Latency 40GbE IP Core User Guide Archives
11. Differences Between Stratix® 10 Low Latency 40G Ethernet IP Core and Low Latency 40G Ethernet IP Core That Targets an Arria 10 Device
12. Document Revision History for Stratix® 10 Low Latency 40G Ethernet User Guide
3.1. Installing and Licensing Intel® FPGA IP Cores
3.2. Specifying the Stratix® 10 LL 40GbE IP Core Parameters and Options
3.3. Simulating the IP Core
3.4. Generated File Structure
3.5. Integrating Your IP Core in Your Design
3.6. Stratix® 10 Low Latency 40G Ethernet IP Core Testbench
3.7. Compiling the Full Design and Programming the FPGA
4.1.1.4. Frame Check Sequence (CRC-32) Insertion
The TX MAC computes and inserts a CRC32 checksum in the transmitted MAC frame. The frame check sequence (FCS) field contains a 32-bit CRC value. The MAC computes the CRC32 over the frame bytes that include the source address, destination address, length, data, and pad (if applicable). The CRC checksum computation excludes the preamble, SFD, and FCS. The encoding is defined by the following generating polynomial:
FCS(X) = X32 +X26 +X23 +X22 +X16 +X12 +X11 +X10 +X8 +X7 +X5 +X4 +X2 +X1 +1
CRC bits are transmitted with MSB (X32) first.
You can configure your IP core TX MAC to implement TX CRC insertion or not, by turning Enable TX CRC insertion on or off in the IP core parameter editor. By default, the CRC insertion feature is enabled.