L-Tile and H-Tile Avalon® Memory-mapped+ Intel® FPGA IP for PCI Express* User Guide
ID
683527
Date
9/13/2024
Public
1. Introduction
2. Quick Start Guide
3. Block and Interface Descriptions
4. Parameters
5. Designing with the IP Core
6. Registers
7. Design Example and Testbench
8. Document Revision History for Intel® L- and H-tile Avalon® Memory-mapped+ IP for PCI Express* User Guide
A. Avalon-MM IP Variants Comparison
B. Root Port BFM
C. BFM Procedures and Functions
D. Troubleshooting and Observing the Link Status
E. Root Port Enumeration
2.1. Design Components
2.2. Directory Structure
2.3. Generating the Design Example
2.4. Simulating the Design Example
2.5. Compiling the Design Example and Programming the Device
2.6. Installing the Linux Kernel Driver
2.7. Running the Design Example Application
2.8. Ensuring the Design Example Meets Timing Requirements
6.1.1. Register Access Definitions
6.1.2. PCI Configuration Header Registers
6.1.3. PCI Express Capability Structures
6.1.4. Intel Defined VSEC Capability Header
6.1.5. Uncorrectable Internal Error Status Register
6.1.6. Uncorrectable Internal Error Mask Register
6.1.7. Correctable Internal Error Status Register
6.1.8. Correctable Internal Error Mask Register
C.1. ebfm_barwr Procedure
C.2. ebfm_barwr_imm Procedure
C.3. ebfm_barrd_wait Procedure
C.4. ebfm_barrd_nowt Procedure
C.5. ebfm_cfgwr_imm_wait Procedure
C.6. ebfm_cfgwr_imm_nowt Procedure
C.7. ebfm_cfgrd_wait Procedure
C.8. ebfm_cfgrd_nowt Procedure
C.9. BFM Configuration Procedures
C.10. BFM Shared Memory Access Procedures
C.11. BFM Log and Message Procedures
C.12. Verilog HDL Formatting Functions
4.4.2. Link Capabilities
Parameter |
Value |
Description |
---|---|---|
Link port number (Root Port only) |
0x01 |
Sets the read-only value of the port number field in the Link Capabilities register. This parameter is for Root Port only. It should not be changed. |
Slot clock configuration |
On/Off | When you turn this option On, indicates that the Endpoint uses the same physical reference clock that the system provides on the connector. When Off, the IP core uses an independent clock regardless of the presence of a reference clock on the connector. This parameter sets the Slot Clock Configuration bit (bit 12) in the PCI Express Link Status register. |