Intel® Stratix® 10 General Purpose I/O User Guide

ID 683518
Date 9/13/2023
Document Table of Contents

2.4.4. Dynamic OCT

Dynamic OCT is useful for terminating a high-performance bidirectional path by optimizing the signal integrity depending on the direction of the data. Dynamic OCT also helps save power because device termination is internal. Internal termination switches on only during input operation and thus draws less static power.

Note: If you use the SSTL-15, SSTL-135, and SSTL-125 I/O standards with the DDR3 memory interface, Intel recommends that you use OCT with these I/O standards to save board space and cost. OCT reduces the number of external termination resistors used.
Table 13.  Dynamic OCT Based on Bidirectional I/ODynamic RT OCT or RS OCT is enabled or disabled based on whether the bidirectional I/O acts as a receiver or driver.
Dynamic OCT Bidirectional I/O State
Dynamic RT OCT Acts as a receiver Enabled
Acts as a driver Disabled
Dynamic RS OCT Acts as a receiver Disabled
Acts as a driver Enabled
Figure 13. Dynamic RT OCT in Intel® Stratix® 10 Devices

Did you find the information on this page useful?

Characters remaining:

Feedback Message