Generic Flash Programmer User Guide: Intel® Quartus® Prime Standard Edition

ID 683491
Date 5/15/2019
Public
Document Table of Contents

1.3.1.2.3. Modifying Programming Flows

You can modify and preserve the flows for Initialization, Program, Erase, Verify/Blank-Check/Examine, and Termination operations for a flash memory device for supported devices. For each operation, you can drag and drop Actions (such as Read Register) into locations in the flow to match the programming requirements of your flash memory device. Modifying a programming flow affects all .jic files that use that programming flow.

Follow these steps to modify a default programming flow:

  1. Define a new configuration device, as Defining a New Flash Memory Configuration Device describes.
  2. In the Configuration Device dialog box, click an available Action on the Initialization, Program, Erase, Verify/Blank-Check/Examine, and Termination tabs.
  3. With the Action selected, drag the action to an arrow point in the flow graphic. The arrow icon changes to indicate when the placement is legal, at which point you can release the mouse to place the Action in the flow. Alternatively, right-click in the flow graphic to add, delete, copy, or paste an Action from the menu.
    Figure 9. Modifying Initialization Flow
  4. To modify the properties of an Action, click the action in the flow graphic. The editable properties appear in the adjacent pane, as Programming Flow Action Properties describes.
  5. When you are satisfied with the modifications, click Apply. The flow preserves with your new configuration device definition, and applies during the flash device programming.

Did you find the information on this page useful?

Characters remaining:

Feedback Message