Generic Flash Programmer User Guide: Intel® Quartus® Prime Standard Edition

ID 683491
Date 5/15/2019
Public
Document Table of Contents

1.3.2. Erasing Flash Memory Sectors

When performing flash memory erase operations via JTAG and a .jic file, the Intel® Quartus® Prime Programmer erases only the flash memory sectors that the .jic specifies.

For example, if you specify a .jic file containing only a 13.6Mbits FPGA image on an EPCQ64A device, the Programmer erases only the bottom 13.6Mbits, and does not erase the remaining 50.4Mbits of data.

To erase the entire flash memory device contents, do not specify a .jic file for flash programming. Rather, manually add the flash device to the associated FPGA device chain by following these steps:

  1. In the Programmer, right-click the target FPGA device, and then click Edit > Attach Flash Device.
  2. Select the appropriate flash device from the list.

Did you find the information on this page useful?

Characters remaining:

Feedback Message