184.108.40.206. Back-Annotate Optimized Assignments
Locking down placement of large blocks related to Clocks, RAMs, and DSPs can produce higher fMAX with less noise. Large blocks like RAMs and DSPs have heavier connectivity than regular LABs, complicating movement during placement. When a seed produces good results from suitable RAM and DSP placement, you can capture that placement with back-annotation. Subsequent compiles can then benefit from the high quality RAM and DSP placement from the good seed.
To back-annotate (copy) the device resource assignments from the last compilation to the project .qsf (or to a Tcl file) for use in the next compilation:
- Run a full compilation, or run the Fitter through at least the Place stage.
- Click Assignments > Back-Annotate Assignments.
- Under Assignments to back-annotate, specify whether you want to preserve Pin assignments, RAM assignments, DSP assignments, Clock assignments, and Clock Spine assignments in the back-annotation.
- In Filter, specify a text string (including wildcards) if you want to filter back-annotated assignments by entity name.
- Under Output, specify whether to save the back-annotated assignments to the .qsf or to a Tcl file. A default Tcl file name displays.
Alternatively, you can run back-annotation with the following quartus_cdb executable. The Shell command field displays the shell command constructed by the options that you specifying the GUI.
quartus_cdb chiptrip_nf --back_annotate --pin --ram --dsp --clocks \ --spines --file "<file>.tcl"
Did you find the information on this page useful?