SDI II Intel® Arria 10 FPGA IP Design Example User Guide

ID 683209
Date 3/28/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

1.6. SDI II Intel® FPGA Design Example Parameters

Table 6.   SDI II Intel® FPGA Design Example Parameters for Intel® Arria® 10 Devices

Parameter

Value

Description

Available Design Example

Select Design

Parallel loopback with external VCXO,

Parallel loopback without external VCXO,

Serial loopback

Select the design example to be generated.
  • Parallel loopback with external VCXO: Parallel loopback design with an external VCXO to synchronize the clock between RX and TX.
  • Parallel loopback without external VCXO: Parallel loopback design which uses internal fPLL on the FPGA to synchronize the clock between RX and TX. Each independent channel requires a dedicated fPLL on the transceiver bank to operate on its own. Intel recommends you to place the reference clock pin to the fPLL near the respective fPLL and do not cross the reference clock pin to the neighboring transceiver bank.
    Note: This option is not available for multi-rate designs and older Intel® Arria® 10 ES devices.
  • Serial loopback: A serial loopback design to enables a simple demonstration when you do not have a video source available and to highlight the Dynamic Tx clock switching feature. The IP core generates an internal video pattern generator along with the TX to be transmitted to RX.
Design Example Options

TX PLL type

CMU,

fPLL,

Select the transceiver PLL type.

  • CMU PLL only supports data rates up to 3G-SDI.
  • fPLL supports all data rates up to 12G-SDI.
    Note: Only fPLL is available for multi-rate designs or when you generate a parallel loopback design without an external VCXO.

Dynamic TX clock switching

Off,

Tx PLL switching,

Tx PLL reference clock switching

  • Off: Disable dynamic switching.
  • TX PLL switching: Instantiates two PLLs, each with its own reference input clock.
  • TX PLL reference clock switching: Instantiates one PLL with two reference input clocks.

Turn on this option to allow dynamic switching between 1 and 1/1.001 data rates.

Design Example Files
Simulation

On,

Off

Turn on this option to generate the necessary files for the simulation testbench.
Synthesis

On,

Off

Turn on this option to generate the necessary files for Intel® Quartus® Prime compilation and hardware demonstration.

Generated HDL Format

Generate File Format

Verilog,

VHDL

Select your preferred HDL format for the generated design example fileset.
Note: This option only determines the format for the generated top level IP files. All other files (e.g. example testbenches and top level files for hardware demonstration) are in Verilog HDL format.

Target Development Kit

Select Daughter Card

Nextera VIDIO 12G-SDI FMC card,

Terasic 12G-SDI FMC card

Select the daughter card to be paired with the Intel FPGA development kit you select for the Select Board parameter. The design example is configured to utilize the on-board SDI connectors when this option is grayed out. This option is not valid when you select the No Development Kit or Custom Development Kit parameter.
Select Board

No Development Kit,

Stratix 10 GX FPGA L-tile Development Kit,

Stratix 10 GX FPGA H-tile Development Kit,

Custom Development Kit

Select the board for the targeted design example.
  • No Development Kit: This option excludes all hardware aspects for the design example. The IP core sets all pin assignments to virtual pins.
  • Intel® Arria® 10 L-tile or H-tile FPGA Development Kit: This option automatically selects the project's target device to match the device on this development kit. You may change the target device using the Change Target Device parameter if your board revision has a different device variant. The IP core sets all pin assignments according to the development kit. Based on the Intel® Arria® 10 device you are using, you can choose to use either the Stratix 10 GX FPGA L-tile or H-tile development kit.
    Note: This option is not available if you select Multi rate (up to 12G-SDI) with Bidirectional mode. The daughter card pins are only compatible with simplex mode.
  • Custom Development Kit: This option allows the design example to be tested on a third party development kit with an Intel FPGA. You may need to set the pin assignments on your own.
Target Device
Change Target Device

On,

Off

Turn on this option and select the preferred device variant for the development kit.