2.1. Cyclone® 10 LP Devices
2.2. MAX® 10 Devices
2.3. Cyclone® V SoC Devices
2.4. Cyclone® V Devices
2.5. Cyclone® IV Devices
2.6. MAX® V Devices
2.7. MAX® II Devices
2.8. Cyclone® III Devices (Legacy Support)
2.9. Cyclone® II Devices (Legacy Support)
2.10. Cyclone® Devices (Legacy Support)
2.11. MAX® 7000A Devices (Legacy Support)
5. DC and Timing Specifications
The automotive-grade devices have the same values for the following specifications as published in the respective device datasheets:
- Absolute maximum ratings
- Recommended operating conditions
- DC electrical characteristics
- Timing specifications over the automotive temperature range
For the maximum power-up current (ICCINT) required to power up an automotive-grade Cyclone® device, use the value specified for the corresponding industrial-grade device.
The on-chip series termination (RS OCT) specifications for the following automotive-grade devices are as follows:
- Automotive-grade Cyclone® III, Cyclone® IV, Cyclone® V, Cyclone® V SoC, Cyclone® 10 LP, and MAX® 10 devices—same as the corresponding industrial-grade devices
- Automotive-grade Cyclone® II devices—same as the corresponding extended-temperature devices
The switching characteristics for the following automotive-grade devices are as follows:
- Automotive-grade Cyclone® III, Cyclone® IV, Cyclone® V, and Cyclone® V SoC devices—same as the devices with –8 speed grade as published in the respective device datasheets
- Automotive-grade MAX® II and MAX® V devices—same as the devices with –5 speed grade as published in the respective device datasheets
Related Information