F-Tile Serial Lite IV Intel® FPGA IP User Guide

ID 683074
Date 6/21/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.2.5. RX CW Removal

This block decodes the CWs and sends data to the user logic using the Avalon® streaming interface after the removal of the CWs.

When there is no valid data available, the RX CW removal block deasserts the rx_avs_valid signal.

In FULL mode, if the user bit is set, this block asserts the rx_is_usr_cmd signal and the data in the first clock cycle is used as user-defined information or command.

When rx_avs_ready deasserts and rx_avs_valid asserts, the RX CW removal block generates an error condition to the user logic.

The Avalon® streaming signals related to this block are as follow:
  • rx_avs_startofpacket
  • rx_avs_endofpacket
  • rx_avs_channel
  • rx_avs_empty
  • rx_avs_data
  • rx_avs_valid
  • rx_num_valid_bytes_eob
  • rx_is_usr_cmd (only available in Full mode)