Intel® Stratix® 10 Hard Processor System Remote System Update User Guide

ID 683021
Date 11/10/2021

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Give Feedback

7.2.7. Creating the Factory Update Image

The following commands are used to create the factory update image used in this example:
mkdir -p images
rm -f images/factory_update.rpd
~/intelFPGA_pro/21.2/nios2eds/ \
quartus_pfg -c hw/ghrd.3/output_files/ghrd_1sx280lu2f50e2vg.sof \
	images/factory_update.rpd \
	-o hps_path=u-boot-socfpga/spl/u-boot-spl-dtb.hex \
	-o mode=ASX4 -o start_address=0x00000 -o bitswap=ON \
	-o rsu_upgrade=ON

The following factory update image is created: images/factory_update.rpd.