Nios® II 3C25 Microprocessor System with LCD Controller

Recommended for:

  • Device: Cyclone® III

  • Quartus®: Unknown



The Nios II 3C25 Microprocessor with LCD Controller design example is a complete system-on-a-programmable-chip (SOPC) solution that incorporates a rich set of system peripherals and standard interfaces for a wide range of embedded applications involving flicker-free video processing and LCD touch panel control. This system consists of a Nios II processor, memories, video pipeline, LCD controller, and other peripherals.

This system is targeted to the Nios II Embedded Evaluation Kit, Cyclone® III Edition development kit. The system provides an interface to the hardware components on the board, such as DDR SDRAM, Synchronous SRAM, CFI Flash, SD card, LEDs, push button, DB9 RS-232 connector, Ethernet MAC/10/100 PHY, and the 800 x 240 pixel RGB LCD touch panel.

Downloading the Design Example

The use of this design is governed by, and subject to, the terms and conditions of the Intel® Design Example License Agreement.

Download the files used in this design example.

Figure 1. Functional blocks of the Nios II 3C25 microprocessor system with LCD controller.

System Specifications

The Nios II 3C25 Microprocessor with LCD Controller Data Sheet (PDF) provides the complete and detailed specifications on this system.