Intel® Ethernet Controller X710/XXV710/XL710 Adapters Dynamic Device Personalization GTPv1 Package

19244
10/31/2021

Introduction

DDP GTPv1 Profile is to enhance performance and optimize core utilization for virtualized enhanced packet core (vEPC) and multi-access edge computing (MEC) use cases. (1.0.3.0)

Available Downloads

  • Size: 117.2 KB
  • SHA1: 55B9CC86407DA131D5913E0B9E27680ED1BC5A30

Detailed Description

Overview

This package contains all the required files to update the parser on the Intel® Ethernet Controller X710/XXV710/XL710 adapters in your system. It contains the binary package file .pkg and checksum file for .pkg file.

 

Limitations and prerequisites

This package should only be used on Intel® Ethernet Controller X710/XXV710/XL710 branded adapters with firmware version 6.01 and later. Please contact your OEM vendor for an appropriate package.

 

DO NOT

  • Power down your system during downloading package to an adapter.
  • Remove the NIC before the package downloading completes.
  • Interrupt the package downloading to an adapter in any other way.

Doing so may make your device unusable and will require device reset.

 

Additional resources 

Article on Dynamic Device Personalization:  https://software.intel.com/en-us/articles/dynamic-device-personalization-for-intel-ethernet-700-series

Product and Performance Information

1

Intel is in the process of removing non-inclusive language from our current documentation, user interfaces, and code. Please note that retroactive changes are not always possible, and some non-inclusive language may remain in older documentation, user interfaces, and code.