GTS SDI II IP User Guide

Download PDF
ID 823539
Date 6/30/2025
Public
Document Table of Contents
Document Table of Contents x
1. GTS SDI II IP Quick Reference 2. GTS SDI II IP Core Overview 3. GTS SDI II IP Core Getting Started 4. GTS SDI II IP Parameters 5. GTS SDI II IP Core Functional Description 6. GTS SDI II IP Core Signals 7. GTS SDI II IP Core Design Considerations 8. GTS SDI II IP Core Testbench and Design Examples 9. Document Revision History for the GTS SDI II IP User Guide
2. GTS SDI II IP Core Overview x
2.1. Release Information 2.2. Device Family Support 2.3. General Description 2.4. Performance and Resource Utilization
3. GTS SDI II IP Core Getting Started x
3.1. Installing and Licensing IP Cores 3.2. Design Walkthrough 3.3. GTS SDI II IP Core Component Files 3.4. Compiling the GTS SDI II IP Core Design 3.5. Programming an FPGA
3.1. Installing and Licensing IP Cores x
3.1.1. Intel FPGA IP Evaluation Mode
3.2. Design Walkthrough x
3.2.1. Creating a New Quartus® Prime Project 3.2.2. Launching IP Catalog 3.2.3. Parameterizing the IP Core 3.2.4. Generating a Design Example and Simulation Testbench
5. GTS SDI II IP Core Functional Description x
5.1. Protocol 5.2. Transceiver 5.3. Submodules 5.4. Optional Features
5.1. Protocol x
5.1.1. Transmitter 5.1.2. Receiver
5.3. Submodules x
5.3.1. Insert Line 5.3.2. Insert/Check CRC 5.3.3. Insert Payload ID 5.3.4. Match TRS 5.3.5. Scrambler 5.3.6. TX Sample 5.3.7. Clock Enable Generator 5.3.8. RX Sample 5.3.9. Detect Video Standard 5.3.10. Detect 1 and 1/1.001 Rates 5.3.11. Transceiver Controller 5.3.12. Descrambler 5.3.13. TRS Aligner 5.3.14. 3Gb Demux 5.3.15. Extract Line 5.3.16. Extract Payload ID 5.3.17. Detect Format 5.3.18. Sync Streams 5.3.19. Convert SD Bits 5.3.20. Insert Sync Bits 5.3.21. Remove Sync Bits
5.4. Optional Features x
5.4.1. SMPTE RP168 Switching Support 5.4.2. SD 20-Bit Interface for Dual/Triple Rate 5.4.3. Intel FPGA Video Streaming Interface
5.4.3. Intel FPGA Video Streaming Interface x
5.4.3.1. RGB Pixel Packing 5.4.3.2. YCbCr 444 Pixel Packing 5.4.3.3. YCbCr 422 Pixel Packing 5.4.3.4. Supported Modes
6. GTS SDI II IP Core Signals x
6.1. GTS SDI II IP Core Resets and Clocks 6.2. Transmitter Protocol Signals 6.3. Receiver Protocol Signals 6.4. Transceiver Signals 6.5. Transmitter Streaming Video and Control Signals 6.6. Receiver Streaming Video and Control Signals
6.2. Transmitter Protocol Signals x
6.2.1. Image Mapping
6.3. Receiver Protocol Signals x
6.3.1. rx_format
7. GTS SDI II IP Core Design Considerations x
7.1. Transceiver Handling Guidelines 7.2. Dual Simplex Merging Tool (DS tool)
7.1. Transceiver Handling Guidelines x
7.1.1. Handling Transceiver in Agilex™ 5 Devices
7.1.1. Handling Transceiver in Agilex™ 5 Devices x
7.1.1.1. System PLL Clocking Mode 7.1.1.2. Unused Transceiver Tiles 7.1.1.3. SmartVID Settings
7.2. Dual Simplex Merging Tool (DS tool) x
7.2.1. Using the DS Tool
8. GTS SDI II IP Core Testbench and Design Examples x
8.1. Design Examples for Agilex™ 5 Devices
1. GTS SDI II IP Quick Reference
2. GTS SDI II IP Core Overview
3. GTS SDI II IP Core Getting Started
4. GTS SDI II IP Parameters
5. GTS SDI II IP Core Functional Description
6. GTS SDI II IP Core Signals
7. GTS SDI II IP Core Design Considerations
8. GTS SDI II IP Core Testbench and Design Examples
9. Document Revision History for the GTS SDI II IP User Guide

5.3.10. Detect 1 and 1/1.001 Rates

This submodule indicates if the incoming video stream is running at PAL (1) or NTSC (1/1.001) rate. The output port signal, rx_clkout_is_ntsc_paln is set to 0 if the submodule detects the incoming stream as PAL (148.5 MHz or 74.25 MHz recovered clock) and set to 1 if the incoming stream is detected as NTSC (148.35 MHz or 74.175 MHz recovered clock).

For correct video rate detection, you must set the top level port signal, rx_coreclk_is_ntsc_paln, to the following bit:

  • 0 if the rx_coreclk signal is 297 MHz, 148.5 MHz or the rx_coreclk_hd signal is 74.25 MHz
  • 1 if the rx_coreclk signal is 296.7 MHz, 148.35 MHz or the rx_coreclk_hd signal is 74.175 MHz
Note: The value for Rx core clock (rx_coreclk) frequency parameter in the IP GUI must be set to rx_coreclk's frequency value. The rx_coreclk_is_ntsc_paln signal is deprecated on Agilex™ devices.
Level Two Title