GTS Serial Lite IV Intel® FPGA IP Design Example User Guide

Download PDF
ID 813973
Date 8/05/2024
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. About the GTS Serial Lite IV Intel® FPGA IP Design Example User Guide 2. Quick Start Guide 3. Detailed Description for GTS Serial Lite IV Design Example 4. Document Revision History for the GTS Serial Lite IV Intel® FPGA IP Design Example User Guide
2. Quick Start Guide x
2.1. Design Example Block Diagram 2.2. Hardware and Software Requirements 2.3. Generating the Design 2.4. Compiling and Simulating the Design 2.5. Compiling and Testing the Design
2.3. Generating the Design x
2.3.1. Design Example Parameters 2.3.2. Directory Structure
3. Detailed Description for GTS Serial Lite IV Design Example x
3.1. Features 3.2. Design Example Components 3.3. Simulation 3.4. Hardware Testing 3.5. Error Handling 3.6. Link Debugging Sequence 3.7. Analog Parameters
3.2. Design Example Components x
3.2.1. Traffic Generator 3.2.2. Traffic Checker 3.2.3. DCFIFO
3.3. Simulation x
3.3.1. Simulation Results for Basic Mode 3.3.2. Simulation Result for Full Mode
1. About the GTS Serial Lite IV Intel® FPGA IP Design Example User Guide
2. Quick Start Guide
3. Detailed Description for GTS Serial Lite IV Design Example
4. Document Revision History for the GTS Serial Lite IV Intel® FPGA IP Design Example User Guide

3.5. Error Handling

The GTS Serial Lite IV IP detects error conditions and the behaviors in response to these error conditions.

Table 10.  Error Condition BehaviorIn this table, N represents the number of lanes.
Signal Width Location Direction Clock Domain Error Indication
tx_error 5 Top-level signal Output tx_core_clkout Not used.
rx_error

(N*2)+3

Top-level signal Output rx_core_clkout

When asserted, indicates an error condition on the RX datapath.

  • [(N*2+2):N+3] = Indicates PCS error for a specific lane.
  • [N+2] = Indicates alignment error. Re-initialize lane alignment if this bit is asserted.
  • [N+1]= Indicates data is forwarded to the user logic when user logic is not ready.
  • [N] = Indicates loss of alignment.
  • [(N-1):0] = Indicates the data contains CRC error.

tx_adaptation_fifo_full

1

Top-level TX DCFIFO signal

 Output TX user clock This vector indicates the write domain TX buffer is full and cannot accept data.

rx_adaptation_fifo_full

1

Top-level RX DCFIFO signal

 Output RX user clock This vector indicates the write domain RX buffer is full and cannot accept data.

readfull

1

Top-level RX DCFIFO signal

 Output RX user clock This vector indicates the read domain buffer is full and cannot accept data.
Level Two Title