Intel® Simics® Simulator for Intel® FPGAs: Agilex™ 5 Virtual Platform User Guide
ID
786901
Date
5/09/2025
Public
1. About This Document
2. Agilex™ 5 Intel® Simics® Virtual Platforms
3. Agilex™ 5 Universal Virtual Platform Component Intel® Simics® Models
4. Running a Simulation with the Agilex™ 5 HPS Model
5. Supported Use Cases
6. Troubleshooting Issues When Migrating Software from Intel® Simics® to Hardware
A. Document Revision History for Intel Simics Simulator for Intel FPGAs Agilex 5 Virtual Platform User Guide
2.1.3.1. Boot-To-Operating System Prompt
2.1.3.2. Basic Ethernet
2.1.3.3. CPU Power-On and Boot Core Selection
2.1.3.4. Reset Flow
2.1.3.5. General Purpose I/O (GPIO) Loopback
2.1.3.6. USB Disks Hot-Plug Support
2.1.3.7. On-Chip Memory IP FPGA Fabric Example Design
2.1.3.8. FPGA-to-HPS Bridges
2.1.3.9. Exercising Peripheral Subsystem in FPGA Fabric Design
2.1.3.10. USB Controller Host/Device Mode Configuration
2.1.3.11. Agilex™ 5 HPS Component and Stepping Silicon Features Selection
2.1.3.12. UART1/UART2 Serial Console Selection
2.1.1.5. FPGA Component
The FPGA component represents the top-level hardware design model in the Quartus® Prime software project design that targets the Agilex™ 5 SoC FPGA device. It matches the logical hierarchy of the fictitious GHRD that the Agilex™ 5 Universal Virtual Platform models. This component only instantiates the qsys_top component and is implemented as a Python script named sm_universal_fpga_comp.py.
The hierarchical name of the FPGA component in the virtual platform is system.board.fpga
A block diagram of the FPGA component is as follows:
Figure 5. FPGA Component