1.5. Compiling and Configuring the Design Example in Hardware
The F-Tile 25G Ethernet IP parameter editor allows you to compile and configure the design example on a target development kit.
To compile and configure a design example on hardware, follow these steps:
- Launch the Quartus® Prime Pro Edition software and select Processing > Start Compilation to compile the design.
- After you generate an SRAM object file .sof, follow these steps to program the hardware design example on the Agilex™ 7 device:
- On the Tools menu, click Programmer.
- In the Programmer, click Hardware Setup.
- Select a programming device.
- Select and add the Agilex™ 7 board to your Quartus® Prime Pro Edition session.
- Ensure that Mode is set to JTAG.
- Select the Agilex™ 7 device and click Add Device. The Programmer displays a block diagram of the connections between the devices on your board.
- In the row with your .sof, check the box for the .sof.
- Check the box in the Program/Configure column.
- Click Start.