F-Tile DisplayPort Intel® FPGA IP Design Example User Guide

Download PDF
ID 709308
Date 4/18/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide 2. Parallel Loopback Design Examples 3. HDCP Over DisplayPort Design Example for Intel Agilex® 7 Devices 4. Document Revision History for F-Tile DisplayPort Intel FPGA IP Design Example User Guide
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide x
1.1. Directory Structure 1.2. Hardware and Software Requirements 1.3. Generating the Design 1.4. Simulating the Design 1.5. Compiling and Testing the Design 1.6. DisplayPort Intel® FPGA IP Design Example Parameters
1.5. Compiling and Testing the Design x
1.5.1. Regenerating ELF File
2. Parallel Loopback Design Examples x
2.1. Intel Agilex® 7 F-tile DisplayPort SST Parallel Loopback Design Features 2.2. Design Components 2.3. Clocking Scheme 2.4. Interface Signals and Parameters 2.5. Simulation Testbench
3. HDCP Over DisplayPort Design Example for Intel Agilex® 7 Devices x
3.1. High-bandwidth Digital Content Protection (HDCP) 3.2. HDCP Over DisplayPort Design Example Architecture 3.3. Nios II Processor Software Flow 3.4. Design Walkthrough 3.5. Protection of Encryption Key Embedded in FPGA Design 3.6. Debug Guidelines
3.4. Design Walkthrough x
3.4.1. Set Up the Hardware 3.4.2. Generate the Design 3.4.3. Include HDCP Production Keys 3.4.4. Compile the Design 3.4.5. View the Results
3.4.3. Include HDCP Production Keys x
3.4.3.1. Store plain HDCP production keys in the FPGA (Support HDCP Key Management = 0) 3.4.3.2. Store encrypted HDCP production keys in the external flash memory or EEPROM (Support HDCP Key Management = 1)
3.4.3.1. Store plain HDCP production keys in the FPGA (Support HDCP Key Management = 0) x
3.4.3.1.1. HDCP Key Mapping from DCP Key Files 3.4.3.1.2. hdcp1x_tx_kmem.v and hdcp1x_rx_kmem.v files 3.4.3.1.3. hdcp2x_rx_kmem.v file 3.4.3.1.4. hdcp2x_tx_kmem.v file
3.4.3.2. Store encrypted HDCP production keys in the external flash memory or EEPROM (Support HDCP Key Management = 1) x
3.4.3.2.1. Intel KEYENC 3.4.3.2.2. Key Programmer
3.4.5. View the Results x
3.4.5.1. LED Functions
3.5. Protection of Encryption Key Embedded in FPGA Design x
3.5.1. Security Considerations
3.6. Debug Guidelines x
3.6.1. HDCP Status Signals 3.6.2. Modifying HDCP Software Parameters 3.6.3. Frequently Asked Questions (FAQ)
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide
2. Parallel Loopback Design Examples
3. HDCP Over DisplayPort Design Example for Intel Agilex® 7 Devices
4. Document Revision History for F-Tile DisplayPort Intel FPGA IP Design Example User Guide

3.4.5. View the Results

At the end of the demonstration, you will be able to view the results on the HDCP-enabled DisplayPort external sink.

To view the results of the demonstration, follow these steps:

  1. Power up the Intel FPGA board.
  2. Change the directory to <project directory>/quartus/ directory.
  3. Type the following command on the Nios II Command Shell to download the Software Object File (.sof) to the FPGA.
    nios2-configure-sof <Intel Quartus Prime project name>.sof
  4. Power up the HDCP-enabled DisplayPort external source and sink (if you have not done so). The DisplayPort external sink displays the output of your DisplayPort external source.

Section Content
LED Functions

Level Two Title