1.1. Release Information
1.2. Device Family Support
1.3. Parameters
1.4. Mailbox Client IP Core Interface Signals
1.5. Mailbox Client IP Avalon® Memory-Mapped Interface
1.6. Commands and Responses
1.7. Specifying the Command and Response FIFO Depths
1.8. Enabling Cryptographic Services
1.9. Using the Mailbox Client IP
1.10. Accessing Quad SPI Flash Mailbox Client IP Core Use Case Examples
1.11. Nios® II and Nios® V Processors HAL Driver
1.12. Mailbox Client IP User Guide Archives
1.13. Document Revision History for the Mailbox Client IP User Guide
1.11.2.1. Configuration Parameter
The LibRSU HAL API configuration parameters are stored in Board Support Package (BSP) setting file. You can edit the configuration parameters through the BSP Driver tab. If they are not specified, the LibRSU HAL API uses the default value.
Variable | Default Value | Description |
---|---|---|
rsu_protected_slot | -1 | Allows protection on a certain slot number. Only slots between 0 and 31 can be protected by this feature. By default (rsu_protected_slot = -1), no slot is protected. |
rsu_log_level | 3 | Allows customization on how much logging information is displayed. The valid inputs are 1,2 and 3. By default, the log level is set as 3 and all logging information is displayed. |
enable_spt_checksum | Disable | Enables check and maintenance of the SPT checksum. By default, the SPT checksum feature is disabled. |
enable_rsu | Disable | Enables the RSU functions. By default, it is disabled and the Mailbox Client IP core performs without the RSU functions. |
fpga_device
|
Disable | Allows configuration targeting the selected Altera FPGA devices. By default, the configuration targets Agilex™ 7, Agilex™ 5 and Agilex™ 3 devices, thus the Stratix® 10 setting is disabled. |