F-Tile Interlaken Intel® FPGA IP Design Example User Guide

ID 683069
Date 4/11/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

4. Document Revision History for F-Tile Interlaken Intel® FPGA IP Design Example User Guide

Document Version Intel® Quartus® Prime Version IP Version Changes
2023.04.11 23.1 6.1.0
  • Updated the product family name to "Intel Agilex 7."
  • Register Map: New register information "fec_snapshot" added in the following tables:
    • Design Example Register Map
    • Design Example Register Map for Interlaken Look-aside Design Example
2022.12.22 22.4 6.0.0
  • Quick Start Guide: IP Supported Combinations of Number of Lanes and Data Rates table updated
  • Generating the Design: Note added about VSR mode setting at the end of the section
  • Compiling and Configuring the Hardware Design Example: Minor corrections in Step 4(b). PAM changed to PAM4. 166.66 MHz changed to 156.25 MHz
  • Testing the Hardware Design Example: Note added in Step 4(c)
2022.09.26 22.3 5.0.0
  • Updated the development kit device part numbers in section: Generating the Design.
  • Updated the Figure: Directory Structure.
  • Updated the steps in section: Compiling and Configuring the Hardware Design Example.
  • Added the external serial loopback support for FHT PMA.
  • Updated the section: Interface Signals with:
    • pll_ref_clk signal description
    • New signals:
      • systempll_ref_clk
      • tx_fc_clk
      • tx_fc_data
      • tx_fc_sync
      • rx_fc_clk
      • rx_fc_data
      • rx_fc_sync
2022.06.21 22.2 4.1.0
  • Added the FHT PMA support for PAM4 variants.
  • Updated commands in section: Testing the Hardware Design Example.
2022.03.28 22.1 4.0.0
  • Added support for the Interlaken Look-aside mode for all variants.
  • Removed support for the ModelSim* SE simulator.
2022.01.14 21.4 3.1.0
  • Added support for the Cadence* Xcelium* simulator.
  • Added support for the Interlaken Look-aside mode for three variants:
    • 6 x 53.125G
    • 12 x 12.5G
    • 12 x 25.78125G
  • Added hardware support for the F-tile Interlaken Intel® FPGA IP Design Example.
2021.10.04 21.3 3.0.0
  • Added support for new lane rate combinations. For more information, refer to Table: IP Supported Combinations of Number of Lanes and Data Rate.
  • Updated the supported simulator list in section: Hardware and Software Requirements.
  • Added new reset registers in section: Register Map.
2021.06.21 21.2 2.0.0 Initial release.