Arria® GX FPGA Early Power Estimator (EPE) Design Tool

Description

The Arria GX FPGA early power estimator results are based on preliminary and characterized power data. Any results obtained while using this estimator are preliminary. The Arria GX PowerPlay early power estimator provides a current (ICC) and power (P) estimate based on various typical conditions (e.g., room temperature and nominal VCC). These calculations should only be used as an estimation of power, not as a specification. The actual ICC should be verified during device operation, as this measurement is sensitive to the actual pattern in the device and the environmental operating conditions.

Instructions for Using the Arria GX FPGA Early Power Estimator

Note: To use the Arria GX FPGA early power estimator, Microsoft Excel must be installed on your PC.

1. Download the Arria GX FPGA early power estimator to your desktop or desired folder, and open the spreadsheet. (Choose Enable Macros in the pop-up box.)
2. Select the target Arria GX device and package from the drop-down box in the Main section.
3. Enter in the requested values for any power consumption section and clock domain. ICC and P values must be recalculated with every modification to update standby current as a function of junction temperature. ICC and P subtotals are given for each section. To get help with the column categories or values to be entered, click on the cell in question.

Note: A macro is embedded within the Arria GX FPGA early power estimator that allows you to reset all user-entered values. If you disable the macro, you will need to reset all user-entered values manually.