TA-1041: BMC Firmware Might Not Restart Properly for Boards and Kits

Last Reviewed: 15-Jul-2017
Article ID: 000008114

Technical Advisory (PDF) icon
A Baseboard Management Controller (BMC) firmware might not restart properly if the reset is because of an IPMI cold reset command or firmware update. The BMC does not respond to most IPMI commands after it has entered this state. This issue has been fixed in BMC 1.19.5018 and later.


File name: TA_1041-01.pdf
Size: 56 KB
Date: November 2013

Note: PDF files require Adobe Acrobat Reader*.

This article applies to:

Active Products