Article ID: 000092178 Content Type: Troubleshooting Last Reviewed: 12/21/2022

What is the latest device firmware available for the Intel® Quartus® Prime Pro Edition Software version 22.2?

Environment

  • Intel® Quartus® Prime Pro Edition
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT

    Critical Issue

    Description

    The latest device firmware for the Intel® Quartus® Prime Pro Edition Software version 22.2 can be downloaded from the following links.

    Fixes for the following problems are included in the latest release (The newest release contains all prior fixes and supersedes earlier device firmware releases).

    Change Log

    FW version 0.09fw:

    - Intel® Agilex™ device CvP update failure after accessing QSPI via Mailbox Client IP.

    -  Incorrect PMBus frequency and duty cycle in the first configuration cycle after power up, and PCIe/Ethernet functional failure after reconfiguration.

    FW version 0.11fw:

    - M20K functional errors in Partial Reconfiguration Regions, seen after partial reconfiguration on Intel Agilex devices.   
    - HPS boot instability due to erroneously disabled HPS RAM repair functionality. 

    FW version 0.16fw:

    - During Intel Agilex device 2x8 bifurcation mode, refclk1 is not preset cause PCIe0 can not be identified after reboot.

    FW version 0.28fw:

                 - SHA mismatch errors and AVSTx8 configuration failures when using an encrypted bitstream configuration.

                 - Quartus programmer support to load provisioning firmware via AVSTx8 using PFL-II IP

    FW version 0.29fw:

                 - Possible M20K functional failure after partial reconfiguration on Agilex devices.

                 - Internal error that the Fitter may encounter on Agilex devices: Internal Error: Sub-system: U2B2_CDB, File: /quartus/db/u2b2/u2b2_re_network_checker.cpp, Line: 174

    FW version 0.34fw:

                  -  The F-Tile Avalon-ST PCI Express link intermittent stuck in link training when using AVSTx8 or ASx4 configuration scheme.

    FW version 0.39fw:

                  -  This patch fixes the SDM firmware bug that when the Sub-System Manager (SSM) RAM repair information is applied incorrectly, this RAM is inaccessible to users. The impacted Agilex OPNs are: AGF019, AGF023, AGI019, AGI023.

    Please also see:

    Updating the SDM Firmware in the Intel® Agilex™ Configuration User Guide 

     

    Updating the SDM Firmware in the Intel® Stratix® 10 Configuration User Guide 

     

    Resolution

    Download the Latest  Device Firmware from the following links:

    Note:

    • Patches must be applied to the Intel® Quartus® Prime Pro Edition Software and the Intel® Quartus® Prime Pro Edition Software Programmer and Tools
    • Recompilation is not required
    • All programming files should be recreated
      • Re-run programming file generation or conversion using the Intel® Quartus® Prime Software programming file generator.

    Related Products

    This article applies to 2 products

    Intel® Agilex™ 7 FPGAs and SoC FPGAs
    Intel® Stratix® 10 FPGAs and SoC FPGAs

    Disclaimer

    1

    All postings and use of the content on this site are subject to Intel.com Terms of Use.