Article ID: 000089288 Content Type: Error Messages Last Reviewed: 01/28/2022

Warning(208542): Fault injection IP on device <number> does not have enough memory to store frame error.

Environment

  • Intel® Quartus® Prime Pro Edition
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    In Intel® Stratix® 10 devices and Intel® Agilex™ devices, when injecting more than 8 errors continuously without the Read EMR using the Fault Injection Debugger, this warning message is displayed. 

    This is because the Error Message Register (EMR) can only store up to 8 messages. 

    Resolution

    To work around this, click Read EMR to read out error messages and clear the Error Message Register (EMR).  Then the warning will not be issued unless more than 8 errors are injected again without the Read EMR. 

    Related Products

    This article applies to 2 products

    Intel® Agilex™ 7 FPGAs and SoC FPGAs
    Intel® Stratix® 10 FPGAs and SoC FPGAs

    Disclaimer

    1

    All postings and use of the content on this site are subject to Intel.com Terms of Use.