Article ID: 000086789 Content Type: Error Messages Last Reviewed: 01/10/2023

Error(18948): Error message received from device: Detected invalid state at location 0x00001400

Environment

  • Intel® Quartus® Prime Pro Edition
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    You may see this error message in Intel® Quartus® Prime Pro Programmer when trying to configure the Intel® Stratix® 10 device on the Intel® Stratix® 10 FPGA Development Kit with a .SOF file, when the MSEL pins are set to Active Serial mode.

    Resolution

    Change the MSEL settings on the board using DIP SW1 to JTAG only (11). Power cycle the board after making this change prior to configuring the FPGA.

    Related Products

    This article applies to 1 products

    Intel® Stratix® 10 FPGAs and SoC FPGAs