Article ID: 000086534 Content Type: Troubleshooting Last Reviewed: 04/25/2017

Why does my Arria 10 SoC design hang in bootloader or when accessing FPGA-to-SDRAM bridge?

Environment

  • Intel® Quartus® Prime Pro Edition
  • Intel® SoC FPGA Embedded Development Suite (SoC EDS) Pro Edition
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to a hardware problem, Arria® 10 SoC devices may hang in bootloader,  during or after bringing up the SDRAM, or when accessing FPGA-to-SDRAM bridge. The hang can occur:

    • When accessing SDRAM Interconnect
    • When accessing SDRAM memory

    The issue is very rare, and can occur after power on, cold and warm resets.

    Resolution

    The problem is fixed in SoC EDS version 17.0 which is available for download at https://dl.altera.com/soceds/.

    A patch for SoC EDS version 16.1 can also be made available upon request. 

    Related Products

    This article applies to 1 products

    Intel® Arria® 10 SX SoC FPGA

    Disclaimer

    1

    All postings and use of the content on this site are subject to Intel.com Terms of Use.