Article ID: 000077326 Content Type: Troubleshooting Last Reviewed: 08/16/2023

Why does the Intel® Stratix® 10 Hard Processor System encounter an error while programming the FPGA core image?

Environment

  • Intel® Quartus® Prime Pro Edition
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT

    Critical Issue

    Description

    Due to a problem with the Intel® Stratix® 10 Secure Device Manager firmware in the Intel® Quartus® Prime Pro Programmer Software version 18.1, the Hard Processor System may encounter an error while programming a large FPGA core image.  In U-boot, this problem may result in a hang or resemble the following error:

    SOCFPGA_STRATIX10 # fpga load 0 ${loadaddr}${filesize}                         

    ....RECONFIG_DATA error: 00000004, Unknown error!                               

    Resolution

    Patch 0.19 for the Intel® Quartus® Prime Pro Edition Software version 18.1 is available to fix this problem.  Download and install the patch from the relevant link below, recompile your Intel Quartus Prime Pro project, and recreate the programming file:

    Related Products

    This article applies to 1 products

    Intel® Stratix® 10 FPGAs and SoC FPGAs