Article ID: 000076595 Content Type: Troubleshooting Last Reviewed: 03/15/2017

<your instantiation>.a10_native_fixed_point_dsp_0: 'Scanout' port cannot be used in this mode

Environment

    Intel® Quartus® Prime Standard Edition
    Intel® Quartus® Prime Pro Edition
BUILT IN - ARTICLE INTRO SECOND COMPONENT
Description

Due to a problem with the Arria® 10 Native Fixed Point DSP IP core, you will receive this error when you select "Enable scanout port" with any of the following modes selected:

  • m18x18_plus36
  • m18x18_systolic
  • m27x27 
Resolution

There is no work around for this problem, other than to de-select Enable scanout port or choose a different mode.

This problem has been fixed starting in Quartus® Prime software release v17.0. 

Related Products

This article applies to 1 products

Intel® Arria® 10 FPGAs and SoC FPGAs

1

Need more help?

Contact support

Disclaimer

1

All postings and use of the content on this site are subject to Intel.com Terms of Use.