IEEE Test Supported on I219, I225 and I226 Adapters
Content Type: Compatibility | Article ID: 000095080 | Last Reviewed: 08/14/2023
When testing a system that connects to Ethernet through a 1000Base-T and 100Base-T port to meet compliance requirements of the 1000Base-T and 100Base-T standards using Intel’s LANconf tool in order to configure the device to enter different operating modes an error QV Driverless Mode is displayed.
When clicking Enter the tool redirects to a screen selection of the system’s network adapter, but another error QV driver is not connected appears.
IEEE test is not supported for I219, I225 and I226. If the customer would like to perform this, the customer needs need to do his/her own inhouse testing.