Skip To Main Content
Support Knowledge Base

Guide to Disable Secure Boot on Intel® NUCs

Content Type: Troubleshooting   |   Article ID: 000089908   |   Last Reviewed: 02/11/2025

If you need to disable Secure Boot, use the following steps:

For Intel NUCs with Visual BIOS For Intel NUCs with Aptio V BIOS
  1. Press F2 during the power on process
    1. If F2 does not work see Can't Access BIOS Setup with F2 Key for Intel® NUC
  2. Go to Advanced > Boot > Secure Boot
  3. Disable Secure Boot.
  4. Press F10 to save and exit BIOS.
  1. Press F2 during the power on process
    1. If F2 does not work see Can't Access BIOS Setup with F2 Key for Intel® NUC
  2. Go to Boot > Secure Boot menu.
  3. Disable Secure Boot.
  4. Press F10 to save and exit BIOS.

 

 

Related Products

This article applies to 46 products.

Discontinued Products