Support Knowledge Base

Unable to Integrate a Switch Add-In Card (AIC) into the Riser Card

Content Type: Install & Setup | Article ID: 000088643 | Last Reviewed: 08/01/2023

Description Resolution Additional information

2U Riser Spare A2UL8RISER2 4-Port PCIe Gen3 x8 Switch AIC AXXP3SWX08040 2U Intel rack server system

Description

Difficulties integrating the 4-Port PCIe Gen3 x8 Switch AIC AXXP3SWX08040

Remove the PCI riser assembly from the system:
Remove the filler panel that corresponds to the add-in card x8 slot.
Remove the fastener screw that corresponds to the mentioned filler.
Insert the AIC until it is fully seated inside the PCI slot on the riser card.
Secure the AIC to the riser bracket with the fastener screw.

This article applies to 2 products.

Intel® Server System LWF1304LNETCENT Intel® Server System LWF1304LNETSLES

Contact support