Connecting the Intel® RealSense™ Camera R200 to the Intel® Aero Compute Board

Documentation

Install & Setup

000023235

04/25/2018

This document shows how to properly connect the Intel® RealSense Camera R200 to the Intel Aero® Compute Board.

The Intel® Aero Vision Accessory Kit includes:

  • Intel® RealSense™ Camera R200
  • 8MP RGB camera
  • VGA camera
  • Associated cables

Caution
Incorrectly connecting the camera to the Intel Aero Compute Board can damage the camera and/or the board.

The interface for the Intel RealSense Camera R200 is the female connector shown below on the right, next to the power button.

The Intel RealSense Camera R200 cable is very similar looking on both sides. It’s important to connect the camera cable with the top view facing upwards. See images below.

Top View Bottom View

Connect the camera cable with the top view facing upwards as shown in the image below.

Note The cable should slide into the socket smoothly with minimal force. Incorrectly connecting the camera cable, or applying excessive force when doing so, can damage the camera and/or the Intel Aero Compute Board. Such damage is not covered by the product warranty.