Repairing Intel® Smart Connect Technology Software

Documentation

Install & Setup

000006248

09/14/2017

In the rare event that your installation of Intel® Smart Connect Technology becomes corrupted, follow these steps to repair it.


For Windows 7* users:

  1. Click Start > Control Panel > Programs > Programs and Features.
  2. Find and select the Intel Smart Connect Technology program listed.
  3. Above the list of applications, click Uninstall.
    1. A minute or two may pass before the process is completed.
  4. You may then re-install the product from the original media.
    1. When complete, all settings are reset to defaults. Enable Intel® Smart Connect Technology from the main GUI interface to resume use (by turning on “Keep Data Fresh”).


For Windows 8* users:

  1. Bring up the charms bar on the right-hand side of your screen by moving your mouse to the bottom right-hand corner of the screen.
  2. Click Settings > Control Panel > Programs > Programs and Features.
  3. Find and select the Intel Smart Connect Technology program listed.
  4. Above the list of applications, click Uninstall.
    1. A minute or two may pass before the process is completed.
  5. You may then re-install the product from the original media.
    1. When complete, all settings are reset to defaults. Enable Intel® Smart Connect Technology from the main GUI interface to resume use (by turning on “Keep Data Fresh”).