Verilog HDL: Customized 4-Port Crosspoint Switch

This design implements a 4-port crosspoint switch where all four ports are bidirectional. Each port is 8 bits wide and can be in tri-state mode, making it an input port. You can connect each port to any other port as an output or input.

Download the Customized 4-Port Crosspoint Switch reference design:

The use of this design is governed by, and subject to, the terms and conditions of the Altera Hardware Reference Design License Agreement.

Figure 1. Four-Port Crosspoint Switch Architecture

For more information on using this example in your project, go to:

These design examples may only be used within Intel Corporation devices and remain the property of Intel. They are being provided on an “as-is” basis and as an accommodation; therefore, all warranties, representations, or guarantees of any kind (whether express, implied, or statutory) including, without limitation, warranties of merchantability, non-infringement, or fitness for a particular purpose, are specifically disclaimed. Intel expressly does not recommend, suggest, or require that these examples be used in combination with any other product not provided by Intel.