Intel® Server Board S2600BP Family BIOS and Firmware Update for Intel® One Boot Flash Update (Intel® OFU)

682130
10/22/2021

Introduction

This download contains the BIOS and firmware update package for the Intel® Server Board S2600BP Family for Intel® One Boot Flash Update (Intel® OFU) Utility.

Available Downloads

  • OS Independent
  • Size: 77.2 MB
  • SHA1: 9CD67CA069B375442320840866C48CE2E4E30BBF

Detailed Description

Attention: 

Do NOT use this OS-based Software Update Package (SUP) if the system is an Intel® Data Center Block for Nutanix* Enterprise Cloud, the said system relies on Nutanix’s Prism Life Cycle Manager for any firmware updates. For more information, visit Nutanix* Life Cycle Manager page. For a list of hardware and firmware compatibility, visit the Nutanix* Hardware and Firmware compatibility page.

Overview

This download contains the BIOS and firmware update package for the Intel® Server Board S2600BP Family for Intel® One Boot Flash Update (Intel® OFU) Utility.

You can use this package to update the BIOS, BMC, ME, FD, and DCPMM DIMMs.

Purpose

This Firmware Update Package supports 1st and 2nd generation Intel® Xeon® Scalable Processor families.

This update package includes the following production-level system firmware updates:

  • BIOS   : 02.01.0014
  • ME     : 04.01.04.505
  • BMC    : 2.86.2da97d3f
  • FRUSDR : 1.47
  • Intel® Optane™ DC Persistent Memory Firmware (DCPMM) - 01.02.00.5446

Firmware requirements 

To update the system firmware stack to the versions included in this update packagethe currently loaded system firmware stack on the system must meet the following:

  •   System BIOS  - R02010013 or later
  •   ME Firmware  - 04.01.04.505 or later
  •   BMC Firmware - 2.48.ce3e3bd2 or later
  •   FRUSDR       - 1.47 or later
  •   PMEM        - 1.2.0.5446 or later

Failure to get to the required firmware stack, may cause unexpected results. 

View firmware updates and troubleshooting tips.

To see firmware updates and troubleshooting tips.

Important notes

  • OFU utility with flashupdt tool does not support DCPMM FW update, please refer to "DCPMM_Update_Intructions.txt" part of this package for instructions to update DCPMM.
  • This SFUP package includes the FW 01.02.00.5417 for Intel® Optane™ DC Persistent Memory (DCPMM), if you received your DCPMM DIMMs with a different FW, please install this one.
  • Starting from BMC 2.22.59c3b83a, when KCS Policy Control Mode is configured as "Deny ALL" on BMC EWS, BMC and FRUSDR cannot be upgraded/downgraded as expected behavior. Updates can still be performed via Redfish or BMC EWS
  • BMC and FRUSDR versions cannot be downgraded to backwards versions.
  • For Windows and WinPE, the user needs to exit/ close the command prompt after each update.
  • Refer first to the release notes for detailed information on installation instructions, supported hardware, what is new, bug fixes, and known issues before starting the firmware update.
  • You must install this update package using Intel® One Boot Flash Update (Intel® OFU) v14.1 build 19 or