Introduction
Provides Intel® Ethernet Controller Driver for Linux* based on the Intel® Server Board M10JNP2SB. As of October 15, 2026, no functional, security, or other updates will be provided for Intel® Ethernet Controller Driver for the Intel® Server Board M10JNP2SB. All versions are provided as is. Intel recommends that users of Intel® Ethernet Controller Driver for the Intel® Server Board M10JNP2SB discontinue use as soon as possible.
Available Downloads
- CentOS 7.4*, Red Hat Enterprise Linux 7.4*, Red Hat Enterprise Linux 7.6*, CentOS 7.6*, SUSE Linux Enterprise Server 15*, Red Hat Enterprise Linux 7.5*
- Size: 337.9 KB
- SHA256: 8FECCF37B10CDE1D68CAA883A153D7584AE03312AD93101FE873C51E43E8B517
Detailed Description
Overview
This driver supports kernel versions 2.6.30 or newer. The associated Virtual
Function (VF) driver for this driver is igbvf.
Driver information can be obtained using ethtool, lspci, and ifconfig. Instructions on updating ethtool can be found in the section Additional
Configurations later in this document.
This driver is only supported as a loadable module at this time. Intel is not supplying patches against the kernel source to allow for static linking of the drivers.
This download is valid for the product(s) listed below.
Disclaimers1
Product and Performance Information
Intel is in the process of removing non-inclusive language from our current documentation, user interfaces, and code. Please note that retroactive changes are not always possible, and some non-inclusive language may remain in older documentation, user interfaces, and code.