Ethernet Port Configuration Tool - EFI*

19440
10/16/2026

Introduction

Download for Ethernet Port Configuration Tool - EFI*

Available Downloads

  • OS Independent
  • Size: 965.7 KB
  • SHA512: 7c007a3e6d576cbdefb8995b81217cfd92a59f83c2374e20ee4e4e1b42c029eedb641332a8128561edcca4f0abcef3466452e03856e0f0b69f6903981da387d5
  • OS Independent
  • Size: 920.3 KB
  • SHA512: c43f60267daaf01c0579b52f677daefc809a7f498c8763c759445c079a3a36e7555d2a8e175fc6abc2bfa9df2a56745270269a7dca0ccc1b0416d82763951a78

Detailed Description

Overview 

The Ethernet Port Configuration Tool (EPCT) is a command line utility that allows users to change the link type of a device. The supported types are defined within the adapter's NVM. This utility displays only the devices that potentially support reconfiguration.

 

NOTE:

  • A reboot is required to apply configuration changes.
  • You may lose link if you change the link type of your device from any port option that contains three to seven ports to a port option that enables multi-lane interfaces, such as 2x100Gbps, 2x50Gbps, or 1x100Gbps. One of the following methods may resolve the issue:
    • Use the utility to change the port option to 8x10Gbps; reboot your system; change to your originally desired configuration.
    • Completely power cycle your system.
  • If the tool displays an error such as "Access error" or "Cannot initialize port," you may be using an outdated driver. Please download the latest driver from https://support.intel.com and try again.

 

Supported operating systems

  • Microsoft Windows Server*
  • Linux* Kernel
  • Red Hat* Enterprise Linux*
  • SUSE* Linux Enterprise Server
  • Canonical Ubuntu*
  • Debian*
  • openEuler* for AArch64 (only on Intel® Ethernet E810 Series)
  • UEFI
  • UEFI ARM 2.3, 2.4, 2.6, 2.7, 2.8, 2.9
  • VMware* ESXi*
  • FreeBSD*

Note:  On systems running Linux, FreeBSD, Solaris, or ESXi, the base driver must be present for EPCT to function correctly.

This download is valid for the product(s) listed below.