Intel® QSFP+ Configuration Utility - ESX* - Final Release

18659
1/14/2020

Introduction

This download record includes Intel® QSFP+ Configuration Utility version 2.34.17.3 for ESX*. - Final Release

Available Downloads

  • VMware*
  • Size: 1.4 MB
  • SHA1: E50FD3B066F3750DAADF244BD71025027B90C1FF

Detailed Description

Update Note:  Record updated on 02/05/2020 (files & file version unchanged)

Overview 

The Intel® QSFP+ Configuration Utility is a command line utility that allows users to change the link type of the installed QSFP+ module. The supported types are defined within the adapter's NVM. This utility displays only the devices that potentially support QSFP+ reconfiguration. Only one port per device is displayed, since changes affect the device as a whole, not individual ports.

NOTE: A reboot is required to apply configuration changes. On systems running Oracle Solaris* 11, you must perform a full reboot, not a fast reboot.

Supported operating systems

  • Microsoft Windows Server* 2008 R2 and later
  • Windows PE* 3.0 and later
  • Linux Kernel* 2.6/3.x and later
  • Red Hat* Enterprise Linux* 6.5 and later
  • SUSE Linux Enterprise Server* 10 SP4 and later
  • UEFI 2.1 and later
  • Oracle Solaris* 11
  • VMWare* ESXi* 5.5 and later
  • FreeBSD* 10.1 and later

Notes

  • On systems running Linux, FreeBSD, Solaris, or ESXi, the base driver must be
    present for QCU to function correctly.
  • On Microsoft Windows* systems, if the driver required to run the tool is not present on the system, it will automatically be installed when QCU is run.

The content on this page is a combination of human and computer translation of the original, English-language content. This content is provided for your convenience and for general information only and should not be relied upon as complete or accurate. If there is any contradiction between the English-language version of this page and the translation, the English-language version will govern and control. View the English-language version of this page.