You will need a host system and a target system that meet the following specifications.
Development Host System
To develop with Intel® TCC Tools, you will need a host system that meets the following specifications:
Recommended: Ubuntu* 20.04 LTS OS
Instructions for Intel® TCC Tools contain steps and dependencies based on Ubuntu* 20.04 LTS OS as the host system. The host components of Intel® TCC Tools are expected to work on all common Linux* distributions, but specific steps for setting up additional dependencies might be different.
Python* release 3.7 or higher required for several components
One of the following boards with a supported processor:
11th Generation Intel® Core™ Processors DDR4 customer reference board with a supported processor:
11th Generation Intel® Core™ i3-1115GRE Processor
11th Generation Intel® Core™ i5-1145GRE Processor
11th Generation Intel® Core™ i7-1185GRE Processor
Intel Atom® x6000E Series Processors reference validation platform with a supported processor:
Intel Atom® x6200FE Processor
Intel Atom® x6212RE Processor
Intel Atom® x6414RE Processor
Intel Atom® x6425RE Processor
Intel Atom® x6427FE Processor
Intel® Xeon® W-11000E Series Processors reference validation platform with a supported processor:
Intel® Xeon® W-11865MRE Processor
Intel® Xeon® W-11865MLE Processor
Intel® Xeon® W-11555MRE Processor
Intel® Xeon® W-11555MLE Processor
Intel® Xeon® W-11155MRE Processor
Intel® Xeon® W-11155MLE Processor
To run the MRL (MMIO Read Latency) sample application, your board will need integrated TSN or a network interface card with Intel® Ethernet Controller I225 Series. If integrated TSN is not available for any reason, the network interface card is required.
Minimum CAT-5E Ethernet cable to connect the target system to the same network as the host.
To acquire boards or boot firmware binaries, contact your Intel representative. Network interface cards with Intel® Ethernet Controller I225 Series are available for purchase.