Triple-Speed Ethernet Intel® FPGA IP User Guide

Download PDF
ID 683402
Date 10/07/2024
Public
Document Table of Contents
Document Table of Contents x
1. About This IP 2. Getting Started with Altera IPs 3. Parameter Settings 4. Functional Description 5. Configuration Register Space 6. Interface Signals 7. Design Considerations 8. Timing Constraints 9. Testbench 10. Software Programming Interface 11. Triple-Speed Ethernet Intel® FPGA IP User Guide Archives 12. Document Revision History for the Triple-Speed Ethernet Intel® FPGA IP User Guide A. Ethernet Frame Format B. Simulation Parameters
1. About This IP x
1.1. Release Information 1.2. Device Family Support 1.3. Features 1.4. 10/100/1000 Ethernet MAC Versus Small MAC 1.5. High-Level Block Diagrams 1.6. Example Applications 1.7. IP Verification 1.8. Performance and Resource Utilization
1.7. IP Verification x
1.7.1. Optical Platform 1.7.2. Copper Platform
2. Getting Started with Altera IPs x
2.1. Design Walkthrough 2.2. Generated Files
2.1. Design Walkthrough x
2.1.1. Creating a New Quartus® Prime Project 2.1.2. Generating a Design Example or Simulation Model 2.1.3. Simulating the System 2.1.4. Compiling the Triple-Speed Ethernet Intel® FPGA IP Design 2.1.5. Programming an FPGA Device
2.2. Generated Files x
2.2.1. Design Constraint File No Longer Generated
3. Parameter Settings x
3.1. Core Configuration 3.2. Ethernet MAC Options 3.3. FIFO Options 3.4. Timestamp Options 3.5. PCS/Transceiver Options
4. Functional Description x
4.1. 10/100/1000 Ethernet MAC 4.2. 1000BASE-X/SGMII PCS With Optional Embedded PMA 4.3. Precision Time Protocol 4.4. Deterministic Latency
4.1. 10/100/1000 Ethernet MAC x
4.1.1. MAC Architecture 4.1.2. MAC Interfaces 4.1.3. MAC Transmit Datapath 4.1.4. MAC Receive Datapath 4.1.5. MAC Transmit and Receive Latencies 4.1.6. FIFO Buffer Thresholds 4.1.7. Congestion and Flow Control 4.1.8. Magic Packets 4.1.9. MAC Local Loopback 4.1.10. MAC Error Correction Code (ECC) 4.1.11. MAC Reset 4.1.12. PHY Management (MDIO) 4.1.13. Connecting MAC to External PHYs
4.1.3. MAC Transmit Datapath x
4.1.3.1. IP Payload Re-alignment 4.1.3.2. Address Insertion 4.1.3.3. Frame Payload Padding 4.1.3.4. CRC-32 Generation 4.1.3.5. Interpacket Gap Insertion 4.1.3.6. Collision Detection in Half-Duplex Mode
4.1.4. MAC Receive Datapath x
4.1.4.1. Preamble Processing 4.1.4.2. Collision Detection in Half-Duplex Mode 4.1.4.3. Address Checking 4.1.4.4. Frame Type Validation 4.1.4.5. Payload Pad Removal 4.1.4.6. CRC Checking 4.1.4.7. Length Checking 4.1.4.8. Frame Writing 4.1.4.9. IP Payload Alignment
4.1.4.3. Address Checking x
4.1.4.3.1. Unicast Address Checking 4.1.4.3.2. Multicast Address Resolution
4.1.6. FIFO Buffer Thresholds x
4.1.6.1. Receive Thresholds 4.1.6.2. Transmit Thresholds 4.1.6.3. Transmit FIFO Buffer Underflow
4.1.7. Congestion and Flow Control x
4.1.7.1. Remote Device Congestion 4.1.7.2. Receive FIFO Buffer and Local Device Congestion
4.1.8. Magic Packets x
4.1.8.1. Sleep Mode 4.1.8.2. Magic Packet Detection
4.1.12. PHY Management (MDIO) x
4.1.12.1. MDIO Connection 4.1.12.2. MDIO Frame Format
4.1.13. Connecting MAC to External PHYs x
4.1.13.1. Gigabit Ethernet 4.1.13.2. Programmable 10/100 Ethernet 4.1.13.3. Programmable 10/100/1000 Ethernet Operation
4.2. 1000BASE-X/SGMII PCS With Optional Embedded PMA x
4.2.1. 1000BASE-X/SGMII PCS Architecture 4.2.2. Transmit Operation 4.2.3. Receive Operation 4.2.4. Transmit and Receive Latencies 4.2.5. GMII Converter 4.2.6. SGMII Converter 4.2.7. Auto-Negotiation 4.2.8. Ten-bit Interface 4.2.9. PHY Loopback 4.2.10. PHY Power-Down 4.2.11. 1000BASE-X/SGMII PCS Reset
4.2.2. Transmit Operation x
4.2.2.1. Frame Encapsulation 4.2.2.2. 8b/10b Encoding
4.2.3. Receive Operation x
4.2.3.1. Comma Detection 4.2.3.2. 8b/10b Decoding 4.2.3.3. Frame De-encapsulation 4.2.3.4. Synchronization 4.2.3.5. Carrier Sense 4.2.3.6. Collision Detection
4.2.6. SGMII Converter x
4.2.6.1. Transmit 4.2.6.2. Receive
4.2.7. Auto-Negotiation x
4.2.7.1. 1000BASE-X Auto-Negotiation 4.2.7.2. SGMII Auto-Negotiation
4.2.10. PHY Power-Down x
4.2.10.1. Power-Down in PCS Variations with Embedded PMA
4.3. Precision Time Protocol x
4.3.1. IEEE 1588v2 Supported Configurations 4.3.2. IEEE 1588v2 Features 4.3.3. IEEE 1588v2 Architecture 4.3.4. IEEE 1588v2 Transmit Datapath 4.3.5. IEEE 1588v2 Receive Datapath 4.3.6. IEEE 1588v2 Frame Format
4.3.6. IEEE 1588v2 Frame Format x
4.3.6.1. PTP Frame in IEEE 802.3 4.3.6.2. PTP Frame over UDP/IPv4 4.3.6.3. PTP Frame over UDP/IPv6
5. Configuration Register Space x
5.1. MAC Configuration Register Space 5.2. PCS Configuration Register Space 5.3. Register Initialization
5.1. MAC Configuration Register Space x
5.1.1. Base Configuration Registers (Dword Offset 0x00 – 0x17) 5.1.2. Statistics Counters (Dword Offset 0x18 – 0x38) 5.1.3. Transmit and Receive Command Registers (Dword Offset 0x3A – 0x3B) 5.1.4. Supplementary Address (Dword Offset 0xC0 – 0xC7) 5.1.5. IEEE 1588v2 Feature (Dword Offset 0xD0 – 0xD6) 5.1.6. Deterministic Latency (Dword Offset 0xE1– 0xE3) 5.1.7. IEEE 1588v2 Feature PMA Delay
5.1.1. Base Configuration Registers (Dword Offset 0x00 – 0x17) x
5.1.1.1. Command_Config Register (Dword Offset 0x02)
5.2. PCS Configuration Register Space x
5.2.1. Control Register (Word Offset 0x00) 5.2.2. Status Register (Word Offset 0x01) 5.2.3. Dev_Ability and Partner_Ability Registers (Word Offset 0x04 – 0x05) 5.2.4. An_Expansion Register (Word Offset 0x06) 5.2.5. If_Mode Register (Word Offset 0x14)
5.2.3. Dev_Ability and Partner_Ability Registers (Word Offset 0x04 – 0x05) x
5.2.3.1. 1000BASE-X 5.2.3.2. SGMII MAC Mode Auto Negotiation 5.2.3.3. SGMII PHY Mode Auto Negotiation
5.3. Register Initialization x
5.3.1. Triple-Speed Ethernet System with MII/GMII or RGMII 5.3.2. Triple-Speed Ethernet System with SGMII 5.3.3. Triple-Speed Ethernet System with 1000BASE-X Interface
6. Interface Signals x
6.1. Interface Signals 6.2. Timing
6.1. Interface Signals x
6.1.1. 10/100/1000 Ethernet MAC Signals 6.1.2. 10/100/1000 Multiport Ethernet MAC Signals 6.1.3. 10/100/1000 Ethernet MAC with 1000BASE-X/SGMII PCS Signals 6.1.4. 10/100/1000 Ethernet MAC with 1000BASE-X/SGMII 2XTBI PCS and Embedded PMA Signals (E-Tile) 6.1.5. 10/100/1000 Ethernet MAC Without Internal FIFO Buffers with 1000BASE-X/SGMII 2XTBI PCS Signals 6.1.6. 10/100/1000 Ethernet MAC Without Internal FIFO Buffers with IEEE 1588v2 and 1000BASE-X/SGMII 2XTBI PCS Signals 6.1.7. 10/100/1000 Ethernet MAC Without Internal FIFO Buffers with IEEE 1588v2, 1000BASE-X/SGMII 2XTBI PCS, SGMII Bridge, and Deterministic Latency Signals 6.1.8. 10/100/1000 Multiport Ethernet MAC with 1000BASE-X/SGMII PCS Signals 6.1.9. 10/100/1000 Ethernet MAC with 1000BASE-X/SGMII TBI (LVDS I/O only) PCS Signals 6.1.10. 10/100/1000 Ethernet MAC with 1000BASE-X/SGMII PCS and Embedded PMA Signals 6.1.11. 10/100/1000 Multiport Ethernet MAC with 1000BASE-X/SGMII PCS and Embedded PMA Signals 6.1.12. 1000BASE-X/SGMII PCS Signals 6.1.13. 1000BASE-X/SGMII 2XTBI PCS Signals 6.1.14. 1000BASE-X/SGMII PCS and PMA Signals
6.1.1. 10/100/1000 Ethernet MAC Signals x
6.1.1.1. Clock and Reset Signals 6.1.1.2. Clock Enabler Signals 6.1.1.3. MAC Control Interface Signals 6.1.1.4. MAC Status Signals 6.1.1.5. MAC Receive Interface Signals 6.1.1.6. MAC Transmit Interface Signals 6.1.1.7. Pause and Magic Packet Signals 6.1.1.8. MII/GMII/RGMII Signals 6.1.1.9. PHY Management Signals 6.1.1.10. ECC Status Signals
6.1.2. 10/100/1000 Multiport Ethernet MAC Signals x
6.1.2.1. Multiport MAC Clock and Reset Signals 6.1.2.2. Multiport MAC Receive Interface Signals 6.1.2.3. Multiport MAC Transmit Interface Signals 6.1.2.4. Multiport MAC Packet Classification Signals 6.1.2.5. Multiport MAC FIFO Status Signals
6.1.3. 10/100/1000 Ethernet MAC with 1000BASE-X/SGMII PCS Signals x
6.1.3.1. TBI Interface Signals 6.1.3.2. Status LED Control Signals 6.1.3.3. SERDES Control Signals 6.1.3.4. ECC Status Signals
6.1.4. 10/100/1000 Ethernet MAC with 1000BASE-X/SGMII 2XTBI PCS and Embedded PMA Signals (E-Tile) x
6.1.4.1. GMII Clock Signals 6.1.4.2. E-Tile Transceiver Native PHY Signals
6.1.7. 10/100/1000 Ethernet MAC Without Internal FIFO Buffers with IEEE 1588v2, 1000BASE-X/SGMII 2XTBI PCS, SGMII Bridge, and Deterministic Latency Signals x
6.1.7.1. Deterministic Latency Clock Signals 6.1.7.2. Deterministic Latency Datapath Signals 6.1.7.3. Deterministic Latency Control and Status Interface Signals 6.1.7.4. Deterministic Latency Interface Signals 6.1.7.5. IEEE 1588v2 PCS TX PTP Alignment Interface Signals
6.1.9. 10/100/1000 Ethernet MAC with 1000BASE-X/SGMII TBI (LVDS I/O only) PCS Signals x
6.1.9.1. LVDS I/O Related Interface Signals
6.1.10. 10/100/1000 Ethernet MAC with 1000BASE-X/SGMII PCS and Embedded PMA Signals x
6.1.10.1. 1.25 Gbps Serial Interface 6.1.10.2. Transceiver Native PHY Signal 6.1.10.3. Arria® 10 Transceiver Native PHY Signals 6.1.10.4. SERDES Control Signals 6.1.10.5. Altera LVDS Transmitter and Receiver Soft-CDR I/O Signals
6.1.11. 10/100/1000 Multiport Ethernet MAC with 1000BASE-X/SGMII PCS and Embedded PMA Signals x
6.1.11.1. IEEE 1588v2 RX Timestamp Signals 6.1.11.2. IEEE 1588v2 TX Timestamp Signals 6.1.11.3. IEEE 1588v2 TX Timestamp Request Signals 6.1.11.4. IEEE 1588v2 TX Insert Control Timestamp Signals 6.1.11.5. IEEE 1588v2 Time-of-Day (TOD) Clock Interface Signals 6.1.11.6. IEEE 1588v2 PCS Phase Measurement Clock Signal 6.1.11.7. IEEE 1588v2 PHY Path Delay Interface Signals
6.1.12. 1000BASE-X/SGMII PCS Signals x
6.1.12.1. PCS Control Interface Signals 6.1.12.2. PCS Reset Signals 6.1.12.3. MII/GMII Clocks and Clock Enablers 6.1.12.4. GMII 6.1.12.5. MII 6.1.12.6. SGMII Status Signals
6.1.13. 1000BASE-X/SGMII 2XTBI PCS Signals x
6.1.13.1. Clock Enablers 6.1.13.2. PCS Reset Signals 6.1.13.3. TBI Interface Signals
6.2. Timing x
6.2.1. Avalon Streaming Receive Interface 6.2.2. Avalon Streaming Transmit Interface 6.2.3. GMII Transmit 6.2.4. GMII Receive 6.2.5. RGMII Transmit 6.2.6. RGMII Receive 6.2.7. MII Transmit 6.2.8. MII Receive 6.2.9. IEEE 1588v2 Timestamp
7. Design Considerations x
7.1. Optimizing Clock Resources in Multiport MAC with PCS and Embedded PMA 7.2. Sharing PLLs in Devices with LVDS Soft-CDR I/O 7.3. Sharing PLLs in Devices with GIGE PHY 7.4. Sharing Transceiver Quads 7.5. Migrating From Old to New User Interface For Existing Designs 7.6. Clocking Scheme of MAC with 2XTBI PCS and Embedded PMA
7.1. Optimizing Clock Resources in Multiport MAC with PCS and Embedded PMA x
7.1.1. MAC and PCS With GX Transceivers 7.1.2. MAC and PCS With LVDS Soft-CDR I/O
7.5. Migrating From Old to New User Interface For Existing Designs x
7.5.1. Exposed Ports in the New User Interface
8. Timing Constraints x
8.1. Creating Clock Constraints 8.2. Recommended Clock Frequency
9. Testbench x
9.1. Triple-Speed Ethernet Testbench Architecture 9.2. Testbench Components 9.3. Testbench Verification 9.4. Testbench Configuration 9.5. Test Flow 9.6. Simulation Model
9.6. Simulation Model x
9.6.1. Generate the Simulation Model 9.6.2. Simulate the IP 9.6.3. Simulation Model Files
10. Software Programming Interface x
10.1. Driver Architecture 10.2. Directory Structure 10.3. PHY Definition 10.4. Using Multiple SG-DMA Descriptors 10.5. Using Jumbo Frames 10.6. API Functions 10.7. Constants
10.6. API Functions x
10.6.1. alt_tse_mac_get_common_speed() 10.6.2. alt_tse_mac_set_common_speed() 10.6.3. alt_tse_phy_add_profile() 10.6.4. alt_tse_system_add_sys() 10.6.5. triple_speed_ethernet_init() 10.6.6. tse_mac_close() 10.6.7. tse_mac_raw_send() 10.6.8. tse_mac_setGMII mode() 10.6.9. tse_mac_setMIImode() 10.6.10. tse_mac_SwReset()
A. Ethernet Frame Format x
A.1. Basic Frame Format A.2. VLAN and Stacked VLAN Frame Format A.3. Pause Frame Format
A.3. Pause Frame Format x
A.3.1. Pause Frame Generation
B. Simulation Parameters x
B.1. Functionality Configuration Parameters B.2. Test Configuration Parameters
1. About This IP
2. Getting Started with Altera IPs
3. Parameter Settings
4. Functional Description
5. Configuration Register Space
6. Interface Signals
7. Design Considerations
8. Timing Constraints
9. Testbench
10. Software Programming Interface
11. Triple-Speed Ethernet Intel® FPGA IP User Guide Archives
12. Document Revision History for the Triple-Speed Ethernet Intel® FPGA IP User Guide
A. Ethernet Frame Format
B. Simulation Parameters

5.2. PCS Configuration Register Space

This section describes the PCS registers. Use the registers to configure the PCS function or retrieve its status.
Note: In MAC and PCS variations, the PCS registers occupy the MAC register space and you access these registers via the MAC 32-bit Avalon memory-mapped control interface. PCS registers are 16 bits wide, they therefore occupy only the lower 16 bits and the upper 16 bits are set to 0. The offset of the first PCS register in this variation is mapped to dword offset 0x80.

If you instantiate the IP using the IP Catalog flow, use word addressing to access the register spaces. When you instantiate MAC and PCS variations, map the PCS registers to the respective dword offsets in the MAC register space by adding the PCS word offset to the offset of the first PCS. For example,

  • In the PCS only variation, you can access the if_mode register at word offset 0x14.
  • In the fMAC and PCS variations, map the if_mode register to the MAC register space:
    • Offset of the first PCS register = 0x80
    • if_mode word offset = 0x14
    • if_mode dword offset = 0x80 + 0x14 = 0x94

If you instantiate the MAC and PCS variation using the Platform Designer system, access the register spaces using byte addressing. Convert the dword offsets to byte offsets by multiplying the dword offsets by 4. For example,

  • For MAC registers:
    • comand_config dword offset = 0x02
    • comand_config byte offset = 0x02 × 4 = 0x08
  • For PCS registers, map the registers to the dword offsets in the MAC register space before you convert the dword offsets to byte offsets:
    • if_mode word offset = 0x14
    • if_mode dword offset = 0x80 + 0x14 = 0x94
    • if_mode byte offset = 0x94 × 4 = 0x250
Table 47.  PCS Configuration Registers
Word

Offset

Register Name R/W Description HW Reset
0x00 control RW PCS control register. Use this register to control and configure the PCS function. For the bit description, see Control Register (Word Offset 0x00). 0x1140
0x01 status RO Status register. Provides information on the operation of the PCS function. 0x0089
0x02 phy_identifier RO 32-bit PHY identification register. This register is set to the value of the PHY ID parameter. Bits 31:16 are written to word offset 0x02. Bits 15:0 are written to word offset 0x03. 0x0101
0x03 0x0101
0x04 dev_ability RW Use this register to advertise the device abilities to a link partner during auto-negotiation. In SGMII MAC mode, the PHY does not use this register during auto-negotiation. For the register bits description in 1000BASE-X and SGMII mode, see 1000BASE-X and SGMII PHY Mode Auto Negotiation. 0x01A0
0x05 partner_ability RO Contains the device abilities advertised by the link partner during auto-negotiation. For the register bits description in 1000BASE-X and SGMII mode, refer to 1000BASE-X and SGMII PHY Mode Auto Negotiation, respectively. 0x0000
0x06 an_expansion RO Auto-negotiation expansion register. Contains the PCS function capability and auto-negotiation status. 0x0000
0x07 device_next_page RO The PCS function does not support these features. These registers are always set to 0x0000 and any write access to the registers is ignored. 0x0000
0x08 partner_next_page 0x0000
0x09 master_slave_cntl 0x0000
0x0A master_slave_stat 0x0000
0x0B – 0x0E Reserved — — —
0x0F extended_status RO The PCS function does not implement extended status registers. —
Specific Extended Registers
0x10 scratch RW Scratch register. Provides a memory location to test register read and write operations. 0x0000
0x11 rev RO The PCS function revision. Always set to the current version of the IP. <IP version number>
0x12 link_timer RW 21-bit auto-negotiation link timer. Set the link timer value from 0 to 16 ms in 8 ns steps (125 MHz clock periods). The reset value sets the link timer to 10 ms.
  • Bits 15:0 are written to word offset 0x12. Bit 0 of word offset 0x12 is always set to 0, thus any value written to it is ignored.
  • Bits 20:16 are written to word offset 0x13. The remaining bits are reserved and always set to 0.
0x8968
0x13 0x0009
0x14 if_mode RW Interface mode. Use this register to specify the operating mode of the PCS function; 1000BASE-X or SGMII. 0
0x17 – 0x1F Reserved — — 0

Section Content
Control Register (Word Offset 0x00)
Status Register (Word Offset 0x01)
Dev_Ability and Partner_Ability Registers (Word Offset 0x04 – 0x05)
An_Expansion Register (Word Offset 0x06)
If_Mode Register (Word Offset 0x14)

Level Two Title