Intel® FPGA RTE for OpenCL™ Pro Edition: Getting Started Guide

ID 683173
Date 6/21/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

3.6.1. Building the Host Application

Build the host executable with the <local_path_to_exm_opencl_hello_world>/hello_world/Makefile file.

To build the host application, perform the following tasks:

  1. If you did not run the aocl install command when performing the steps from Installing an FPGA Board, you must execute the following command:
    aocl install -fcd-only <board_package_path>/a10_ref

    The ICD driver links the host against the libOpenCL.so, which requires the FPGA Client Driver (FCD) installed. For installing FCD, refer to Installing an FPGA Board.

    Note: If you do not have the root privilege, refer to Installing an FPGA Board.
  2. Navigate to the hello_world directory.
  3. Invoke the make command.
    The hello_world executable is generated in the bin sub-directory.
  4. If you performed the step 1, then you must execute the following command:
    aocl uninstall -fcd-only <board_package_path>/a10_ref

Did you find the information on this page useful?

Characters remaining:

Feedback Message