Server Products
Server Products
SuSE* Linux Enterprise Server Unable to Boot After Basic Installation

During SuSE* Linux Enterprise Server installation, if a USB floppy drive is used to load mass storage driver, SuSE* Linux Enterprise Server may not able to boot after basic installation.

The following message appears:

resume device /dev/sdb1 not found (ignoring)
waiting for device /dev/sdb2 to appear..............................not found -- exiting to /bin/sh

This is because during installation, the USB floppy device was recognized as sda, and the mass storage was recognized as sdb. After reboot, mass storage is now recognized as sda, but SuSE* Linux still tries to load system files from sdb. To solve this issue, the grub menu list file and the fstab file needs to be modified.

At $ prompt, type the following command to mount file system on mass storage:

mount /dev/sda2 /tmp

(1) Edit the grub menu list file to change all entries with sdb to sda:

/tmp/bin/vi /tmp/boot/grub/menu.lst

(2) Next edit the fstab file to change all entries with sdb to sda and remove lines with floppy: 

/tmp/bin/vi /tmp/etc/fstab

(3) Press Crtl-Alt-Del to reboot the server. SuSE* Linux should be able to find root file system and continue installation.

Operating System:

SUSE Linux Enterprise Server 10*

This applies to:

Intel® Server Board S5000PAL
Intel® Server Board S5000PSL Family
Intel® Server Board S5000VCL
Intel® Server Board S5000VSA
Intel® Server Board S5000XSL
Intel® Server System SC5400RA
Intel® Server System SR2520SA
Intel® Workstation Board S5000XVN

Solution ID: CS-025446
Last Modified: 09-Mar-2015
Date Created: 22-Jan-2007
Back to Top