Desktop Boards
Intel® Desktop Board DH67CL
System memory

System memory features
The board has four DDR3 DIMM sockets arranged in two channels and supports the following memory features:

  • Two independent memory channels with interleaved mode support
  • Support for non-ECC, unbuffered, single-sided or double-sided DIMMs with x8 organization and single-sided DIMMs with x16 organization
  • 32 GB maximum total system memory (with 4 Gb memory technology)
  • Minimum total system memory: 512 MB
  • Serial Presence Detect
  • DDR3 1333 MHz and DDR3 1066 MHz SDRAM DIMMs

32-bit operating systems are limited to a maximum of 4 GB of memory. These operating systems will report less than 4 GB because of the memory used by add-in graphics cards and other system resources.

To be fully compliant with all applicable Intel® SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. If your memory modules do not support SPD, you will see a notification to this effect on the screen at power up. The BIOS will attempt to configure the memory controller for normal operation.

1.5 V is the recommended and default setting for DDR3 memory voltage. The other memory voltage settings in the BIOS Setup program are provided for performance tuning purposes only. Altering the memory voltage may (i) reduce system stability and the useful life of the system, memory, and processor; (ii) cause the processor and other system components to fail; (iii) cause reductions in system performance; (iv) cause additional heat or other damage; and (v) affect system data integrity.

Intel has not tested and does not warranty the operation of the processor beyond its specifications. For information on the processor warranty, refer to Processor Warranty Information.

Supported memory configurations

DIMM Capacity Configuration SDRAM Density SDRAM Organization Front-side/Back-side Number of SDRAM Devices
512 MB Single-sided 1 Gbit 64 M x 16 / empty 4
1 GB Single-sided 1 Gbit 128 M x 8 / empty 8
1 GB Single-sided 2 Gbit 128 M x 16 / empty 4
2 GB Double-sided 1 Gbit 128 M x 8 / 128 M x 8 16
2 GB Single-sided 2 Gbit 128 M x 16 / empty 8
4 GB Double-sided 2 Gbit 256 M x 8 / 256 M x 8 16
8 GB Double-sided 4 Gbit 512 M x 8 / 512 M x 8 16

Third-party tested memory

Computer Memory Test Labs* (CMTL) tests third-party memory for compatibility with Intel boards as requested by memory manufacturers. See the CMTL tested memory list for the Intel® Desktop Board DH67CL.

The table below lists parts which passed testing during development. These part numbers may not be readily available throughout the product life cycle.

Module Supplier Module Part Number Size Module Speed (MHz)
ADATA* M3OHYMH3J4130G2C5Z 2 GB 1333
ADATA AX3U1600GB2G9 2 GB 1600
APACER* 240P 1 GB 1333
ELPIDA* EBJ10UE8BAFA-AG-E 1 GB 1066
ELPIDA EBJ10UE8BDF0 1 GB 1333
ELPIDA EBJ21UE8BBF0 2 GB 1066
ELPIDA EBJ21UE8BBF0-DJ-F 2 GB 1333
Hynix* HMT112U6BFR8C-G7 1 GB 1066
Hynix HMT112U6TFR8C-H9 1 GB 1333
Hynix HMT125U6BFR8C-G7 2 GB 1066
Hynix HMT125U6BFR8C-H9 2 GB 1333
Hynix HMT351U6AFR8C-H9 4 GB 1333
KINGSTON* HP497156-C01-ELB 1 GB 1333
KINGSTON KHX1866C9D3T1K3/3GX 1 GB 1866
KINGSTON KHX1600C9D3 2 GB 1600
KINGSTON KHX2133C9AD3T1K2 2 GB 2133
Micron* MT8JTF12864AY 1 GB 1066
Micron MT8JTF12864AZ-1G4F1 1 GB 1333
Micron MT16JTF25664AY-1G1D1 2 GB 1066
Micron MT16JTF25664AY-1G4D1 2 GB 1333
Micron MT16JTF1G64AZ-1G4D1 8 GB 1333
QIMONDA* IMSH1GU13A1F1C 1 GB 1066
QIMONDA IMSH2GU13A1F1C 2 GB 1333
QIMONDA IMSH51U03A1F1C 512 MB 1066
SAMSUNG* M378B22873DZ1-CH9 1 GB 1333
SAMSUNG M378B5673FH0-CH9 2 GB 1333
SAMSUNG M378B5273DH0-CH9 4 GB 1333
SAMSUNG M378B2873EH1-CF8 1 GB 1066
SAMSUNG M378B5673DZ1-CF8 2 GB 1066

This applies to:

Intel® Desktop Board DH67CL



Solution ID: CS-031963
Last Modified: 17-May-2012
Date Created: 02-Nov-2010
Back to Top