Desktop Boards
Intel® Desktop Board DH57DD
System memory

Content
System Memory Features
Supported Memory Configurations
Tested Memory


System Memory Features
The board has four DIMM sockets and supports the following memory features:

  • Four independent memory channels with interleaved mode support
  • Support for non-ECC, unbuffered, single-sided or double-sided DIMMs with x8 organization and single-sided DIMMs with x16 organization
  • 16 GB maximum total system memory (with 2 Gb memory technology).
  • Minimum total system memory: 512MB using 1 Gb x16 module
  • Serial Presence Detect
  • DDR3 1333 MHz and DDR3 1066 MHz SDRAM DIMMs
To be fully compliant with all applicable Intel® SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. If your memory modules do not support SPD, you will see a notification to this effect on the screen at power up. The BIOS will attempt to configure the memory controller for normal operation.

Supported Memory Configurations

DIMM Capacity Configuration SDRAM Density SDRAM Organization Front-side/Back-side Number of SDRAM Devices
512 MB Single sided 1 Gbit 1 Gb x 16 / empty 4
1 GB Single sided 1 Gbit 1 Gb x 8 / empty 8
2 GB Double sided 1 Gbit 1 Gb x 8 / 1 Gb x 8 16
2 GB Single sided 2 Gbit 2 Gb x 8 / empty 8
4 GB Double sided 2 Gbit 2 Gb x 8 / 2 Gb x 8 16

Third-party tested memory

Computer Memory Test Labs* (CMTL) tests third-party memory for compatibility with Intel boards as requested by memory manufacturers. See the CMTL tested memory list for this Intel® Desktop Board.

This applies to:

Intel® Desktop Board DH57DD



Solution ID: CS-031262
Last Modified: 13-Mar-2012
Date Created: 31-Jan-2010
Back to Top