System memory features

• 1.5V DDR3 SDRAM SO-DIMMs with gold plated contacts
• Support for 1.35V low voltage DDR3, a new JEDEC specification
• Two independent memory channels with interleaved mode support
• Unbuffered, single-sided, or double-sided SO-DIMMs
• 16 GB maximum total system memory, with 4 GB memory technology
• Minimum recommended total system memory is 1024 MB
• Non-ECC SO-DIMMs
• Serial presence detect
• XMP profile support for voltage detection
• DDR3 1600 MHz, DDR3 1333 MHz, and DDR3 1066 MHz SDRAM SO-DIMMs

For full compliance with applicable Intel SDRAM memory specifications, the board requires DIMMs supporting the serial presence detect (SPD) structure. The BIOS can then read the SPD data and program the chipset to accurately configure memory settings for optimum performance. If non-SPD memory is installed, the BIOS tries to correctly configure the memory settings. Performance and reliability can be impacted or the SO-DIMMs might not function.

Tested memory

Computer Memory Test Labs* (CMTL) tests third-party memory for compatibility with Intel boards at the memory manufacturers request. See the CMTL Advanced Tested Memory List* for this board.

The table below lists parts which passed testing during development. These part numbers might not be readily available throughout the product life cycle.

Customer-reported compatible
The table below lists parts which have been reported as compatible by owners of the Next Unit of Computing Kit DC3217IYE. Intel has not validated these modules.

This applies to:

Next Unit of Computing Board D33217GKE Next Unit of Computing Kit DC3217IYE